Best Camber Correction Components, Bushings etc. for moderate lowering on coilovers?
#1
Driver School Candidate
Thread Starter
Join Date: Dec 2014
Location: TX
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Best Camber Correction Components, Bushings etc. for moderate lowering on coilovers?
What brand/parts do you guys recommend for alignment correction for lowering my 07 is350 (120k miles) about 2.5 inches? I am about to install BC BR coilovers, and have 20 inch Rohana RC-10 wheels (9 inch front, 10 inch rear 225/30 front, 255/30 rear). I may want to run a little bit of negative camber front and rear since the fitment is pretty close on my wheels/tires. I don't like to tuck my wheels, just lower to slightly above the tires evenly front and rear, and want as near as stock alignment so I don't get too much uneven wear.
I see FIGS has some nice bushings and arms, and others as well so I'm open to all components that would be recommended given my desired setup.
Thanks!
I see FIGS has some nice bushings and arms, and others as well so I'm open to all components that would be recommended given my desired setup.
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post