IS - 2nd Gen (2006-2013) Discussion about the 2006+ model IS models

Temperature Problem

Thread Tools
 
Search this Thread
 
Old 12-29-14, 11:35 AM
  #1  
tronbarr
Driver School Candidate
Thread Starter
 
tronbarr's Avatar
 
Join Date: Dec 2014
Location: Tennessee
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default Temperature Problem

Hi to all. I hope this isthe proper like action for this post, if not please be are with me. I recently purchased a 2008 IS250. Car has run great for a few months. I recently loaned the car for a trip of about 900 miles and on literally the last few miles it started steaming from under the hood.

I looked at it this morning and there is a red liquid residue all over the lower engine compartment. There is no oil/gas smell so I assume this is Toyota coolant. The overflow red is full. Oil level checks full. Starting the car and letting it idle for several minutes does not raise the temp readout and the heater blows only cold air. After 10-15 minutes there is no steam or noticeable leakage I can detect, but I obviously can't see everything.

Any ideas?
Old 12-29-14, 02:13 PM
  #2  
Gville350
Moderator
iTrader: (10)
 
Gville350's Avatar
 
Join Date: Mar 2011
Location: South Carolina
Posts: 11,568
Likes: 0
Received 430 Likes on 384 Posts
Default

Water pump...99% positive. Since you're new to these forums you wouldn't know that the water pump is unfortunately a VERY common failure item. Do not drive it any further; tow it to a shop/dealership or DIY ASAP. What you consider "red" is actually the pink Toyota branded long life coolant.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
LexoticJ
IS - 2nd Gen (2006-2013)
14
02-13-21 05:44 PM
terminater
LS - 3rd Gen (2001-2006)
33
08-24-17 05:43 PM
racsos222
IS - 2nd Gen (2006-2013)
5
03-28-15 03:37 PM
01BabyLexy
IS - 1st Gen (2001-2005)
2
04-11-13 11:02 AM
Eds98LS
LS - 1st and 2nd Gen (1990-2000)
1
11-26-11 10:54 PM



Quick Reply: Temperature Problem



All times are GMT -7. The time now is 03:48 PM.