neutral130

Anyone have issue with exhaust being uneven. My left exhaust tip sticks out about 1/3 inch more than the right and hangs about 1/4 in lower. I thought it might be a bent muffler or tip but I changed out the oem for Tanabe axle back today and the left tip is still hanging and sticking out a bit more than the right. Anyone know a quick fix for this or will I have to take it to a dealer?

Thanks!

sw2oboi

iTrader: (12)

one side hanging lower then other is common. I actually had one side stick out more then another on my stock exhaust. I don't think its a bent muffler or tip.

BoyOhBoy

iTrader: (9)

Use zip tie and it's solved

getafewliv

Some people have tried hose clamps as well. I had one on, but it fell off.

Going to use a zip tie next. If that doesn't work then a combo of the two.

In case it isn't obvious, you wrap the zip tie or hose clamp around the rubber hanger and compress it to raise the lower side.

604GSE21

my greddy is uneven tried to adjust one side and the other side is off

JdSwiper

iTrader: (4)

I have this problem with my HKS as well!

neutral130

I'll try the zip ties and let you guys know how it works.

BoyOhBoy

iTrader: (9)

Zip ties work. I did it for my f sport and it came out perfect

2isBenLind

so how did you manage to use the zip ties to extend the right out my hks exhaust right tip sits in less than my left

firestart9

Ha ha...I noticed this...it always bugged me looking at it.

SeanO

iTrader: (1)

My tanabe hangs lower on drive side as well. Beefy zip tie around hangar, problem solved. Been on there for 6+yrs. Not much you can do if tips are diff lengths, could try adjusting hangars on both sides to split the diff..