19x10.5 +22 fitment help!
#18
Driver
Thread Starter
iTrader: (17)
Join Date: Oct 2009
Location: CA
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
It's not that I'm against camber kit - I'm just a bit confused cause I'm reading some threads where others can achieve that "look" from natural camber, but I guess it's all trial and error.
#22
Should work, but I agree with what the guys are saying about the camber arms, Im running 19x10.5+20 with 255's all around even in the front with camber arms and such, but again i'm on air,
#23
Driver
Thread Starter
iTrader: (17)
Join Date: Oct 2009
Location: CA
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Yeahh I found a guy local selling megan camber so I picked it up.
Installing everything the tires, camber, front fender bumper tab mod, rears rolled more, and alignment.
Hopefully it'll remove all the rubbing
Installing everything the tires, camber, front fender bumper tab mod, rears rolled more, and alignment.
Hopefully it'll remove all the rubbing
#28
Lexus Test Driver
My last setup were these exact same specs in the rear and I had a 245/35 tire with fenders shaved, natural pull, and fender tabs relocated. I didn't do any added camber and my tires never had excessive wear either. Depending on how low you are, you will almost always rub if you ever hit a big dip or change in pavement but for me that was very rare. I was surprised I didn't rub when I looked at pictures of my car and/or video shots.
#29
Driver
Thread Starter
iTrader: (17)
Join Date: Oct 2009
Location: CA
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Good to know. I've heard horror stories of fender shaving so I stayed away from that.
Right now, I'm about a half finger dropped in the rear. I only have minor rubs on huge dips on the freeways but other than that it's not bad.
Still needa do the front bumper relocation though..
Right now, I'm about a half finger dropped in the rear. I only have minor rubs on huge dips on the freeways but other than that it's not bad.
Still needa do the front bumper relocation though..
Thread
Thread Starter
Forum
Replies
Last Post
trinityhk
IS - 2nd Gen (2006-2013)
7
03-15-08 10:29 PM