For those that were once lowered on OEM 18's
05-04-14, 06:48 PM
#1
Driver School Candidate
Thread Starter
Join Date: May 2014
Location: CA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
For those that were once lowered on OEM 18's
2012 on 12kg/10kg
Plan on going no gap or just below that mark on BC's. Already planning on having my brother rolling the fenders and tucking up the liner for a later wheel set up.
-Even though I do plan on getting an alignment, How bad was the alignment off at this height?
-Any suggestions on what dampening settings so I can use it as a base?
Any other advice would be welcomed as well
Plan on going no gap or just below that mark on BC's. Already planning on having my brother rolling the fenders and tucking up the liner for a later wheel set up.
-Even though I do plan on getting an alignment, How bad was the alignment off at this height?
-Any suggestions on what dampening settings so I can use it as a base?
Any other advice would be welcomed as well
05-04-14, 06:59 PM
#2
2012 on 12kg/10kg
Plan on going no gap or just below that mark on BC's. Already planning on having my brother rolling the fenders and tucking up the liner for a later wheel set up.
-Even though I do plan on getting an alignment, How bad was the alignment off at this height?
-Any suggestions on what dampening settings so I can use it as a base?
Any other advice would be welcomed as well
Plan on going no gap or just below that mark on BC's. Already planning on having my brother rolling the fenders and tucking up the liner for a later wheel set up.
-Even though I do plan on getting an alignment, How bad was the alignment off at this height?
-Any suggestions on what dampening settings so I can use it as a base?
Any other advice would be welcomed as well
Im on 23/30 dampening
05-05-14, 12:34 PM
#3
Though I cannot find my alignment sheet from Lexus, if I remember right I'm at 2.3 up front and 2.8 in the rear and lowered MORE than no gap on BCRs on stock wheels on 225/35 and 245 40s.
With that said, I didn't have Lexus mess with the camber...only the TOE. I enjoy my corners too much and love the amount of natural camber the drop allows. You WILL scape that front fender liner though; I just removed mine altogether.
With that said, I didn't have Lexus mess with the camber...only the TOE. I enjoy my corners too much and love the amount of natural camber the drop allows. You WILL scape that front fender liner though; I just removed mine altogether.
Thread
Thread Starter
Forum
Replies
Last Post