IS - 2nd Gen (2006-2013) Discussion about the 2006+ model IS models

Transmission issue, Code P0751

Thread Tools
 
Search this Thread
 
Old 04-03-14, 01:36 PM
  #1  
kennyD
Intermediate
Thread Starter
 
kennyD's Avatar
 
Join Date: Mar 2012
Location: TX
Posts: 325
Received 42 Likes on 30 Posts
Default Transmission issue, Code P0751

Searched and found almost nothing on this, and yes I did read the thread from another member about his same issue, it still had little information.

Basics: 2008 IS250 RWD, 65,000 Miles.
  • Car will only shift up to 3rd gear
  • Pulled code P0751 - Shift solenoid A stuck in OFF (I think?)

New transmission is $2800 + Labor from Lexus.

Does anyone have any info regarding this? I understand the solenoid sits inside the transmission. Can they be purchased and replaced? Or will I be needing a full rebuild?
Old 04-03-14, 01:46 PM
  #2  
Orozco27
Driver
iTrader: (2)
 
Orozco27's Avatar
 
Join Date: Jul 2012
Location: california
Posts: 105
Likes: 0
Received 0 Likes on 0 Posts
Default

i had kind of a similar issue. mine would shift down on its own with the throttle steady. i would drive about 30mph and car would shift 2nd to 3rd then right a away shift back to 2nd with out steping on gas. i work at a toyota dealership and the mechanics a scan tool and i belive that code pulled up.. so they checked and there was a TSB. so all my car needed was a computer reflash and update to a new version and that fixed it.
Old 04-03-14, 01:47 PM
  #3  
Orozco27
Driver
iTrader: (2)
 
Orozco27's Avatar
 
Join Date: Jul 2012
Location: california
Posts: 105
Likes: 0
Received 0 Likes on 0 Posts
Default

take it to the lexus dealer and ask them to check for a tsb
Old 04-03-14, 01:49 PM
  #4  
kennyD
Intermediate
Thread Starter
 
kennyD's Avatar
 
Join Date: Mar 2012
Location: TX
Posts: 325
Received 42 Likes on 30 Posts
Default

Originally Posted by Orozco27
take it to the lexus dealer and ask them to check for a tsb
I'd have to drive 30 mins for the closest Lexus dealer.
Because it stays in third, driving a far distance is not something I wish to do.
Looks like I may have to tow it.
Old 04-03-14, 01:58 PM
  #5  
Gville350
Moderator
iTrader: (10)
 
Gville350's Avatar
 
Join Date: Mar 2011
Location: South Carolina
Posts: 11,568
Likes: 0
Received 430 Likes on 384 Posts
Default

Originally Posted by Orozco27
take it to the lexus dealer and ask them to check for a tsb
What model and yr is your 2IS? Do you have the TSB ID #?
Old 04-03-14, 06:12 PM
  #6  
mikellucci
Instructor
iTrader: (56)
 
mikellucci's Avatar
 
Join Date: Nov 2005
Location: Ohio
Posts: 814
Received 28 Likes on 15 Posts
Default

The solenoids can be replaced inside of the tranny. Its a dirty job. If you have to pay for the labor you might as well just buy a used tranny from a junkyard as it will likely be cheaper than opening up your tranny, replacing solenoids and hoping it fixes the issue(s). :/
Old 04-03-14, 08:58 PM
  #7  
Orozco27
Driver
iTrader: (2)
 
Orozco27's Avatar
 
Join Date: Jul 2012
Location: california
Posts: 105
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Gville350
What model and yr is your 2IS? Do you have the TSB ID #?
No but I can get it tomorrow when I go to work and mines a 2006 is250
Old 04-04-14, 04:44 AM
  #8  
kennyD
Intermediate
Thread Starter
 
kennyD's Avatar
 
Join Date: Mar 2012
Location: TX
Posts: 325
Received 42 Likes on 30 Posts
Default

Originally Posted by mikellucci
The solenoids can be replaced inside of the tranny. Its a dirty job. If you have to pay for the labor you might as well just buy a used tranny from a junkyard as it will likely be cheaper than opening up your tranny, replacing solenoids and hoping it fixes the issue(s). :/
Wow, is it really that extensive? From the diagram (sewellparts.com), it looks like the solenoid sits in the valve body, which is likely underneath the transmission. Ah, I don't know, I'm just looking at diagrams and making guesses. I'm going to take it to a transmission shop today for a check.
Old 04-04-14, 12:24 PM
  #9  
kennyD
Intermediate
Thread Starter
 
kennyD's Avatar
 
Join Date: Mar 2012
Location: TX
Posts: 325
Received 42 Likes on 30 Posts
Default

Update:

Took it to a transmission shop. Technician drove it around, pulled OBD codes, then reset the light. Now it works perfectly. WTH?
Old 04-04-14, 12:33 PM
  #10  
Gville350
Moderator
iTrader: (10)
 
Gville350's Avatar
 
Join Date: Mar 2011
Location: South Carolina
Posts: 11,568
Likes: 0
Received 430 Likes on 384 Posts
Default

^That's good to hear!
Old 04-04-14, 01:44 PM
  #11  
aznKewlguy
Intermediate
iTrader: (5)
 
aznKewlguy's Avatar
 
Join Date: Aug 2011
Location: CA
Posts: 265
Received 17 Likes on 10 Posts
Default

that what i did, temporary fix for me but it came back 2 days later. I unplugged the battery and plugged it back in..

Mine used to get stuck in third gear. Now its stuck in 4th. Better I guess. Hoping mine wont crap out on me within the next 2 months. Gonna finish school before I fix the problem.
Old 04-04-14, 09:08 PM
  #12  
kennyD
Intermediate
Thread Starter
 
kennyD's Avatar
 
Join Date: Mar 2012
Location: TX
Posts: 325
Received 42 Likes on 30 Posts
Default

Originally Posted by aznKewlguy
that what i did, temporary fix for me but it came back 2 days later. I unplugged the battery and plugged it back in..

Mine used to get stuck in third gear. Now its stuck in 4th. Better I guess. Hoping mine wont crap out on me within the next 2 months. Gonna finish school before I fix the problem.
Hmm.. really?? Does your tranny still drive smooth in the mean time?

I was quoted $2100 for rebuild with 12-months warranty.
Does that sound pretty reasonable?
Old 04-05-14, 01:11 PM
  #13  
aznKewlguy
Intermediate
iTrader: (5)
 
aznKewlguy's Avatar
 
Join Date: Aug 2011
Location: CA
Posts: 265
Received 17 Likes on 10 Posts
Default

I was quoted if I'm lucky 700 for the solenoid if that doesn't fix it 1700 for rebuild or 2100 for a tranny swap with 50k miles on it.
Old 04-05-14, 03:47 PM
  #14  
kennyD
Intermediate
Thread Starter
 
kennyD's Avatar
 
Join Date: Mar 2012
Location: TX
Posts: 325
Received 42 Likes on 30 Posts
Default

My transmission guy won't warranty a used junkyard transmission. He will only warranty if it he rebuilds it himself. Which is reasonable to me. He said $400 labor if he installs a used tranny, $2100 if he rebuilds.
Old 04-06-14, 07:31 AM
  #15  
LexoticJ
Racer
iTrader: (5)
 
LexoticJ's Avatar
 
Join Date: May 2011
Location: GA
Posts: 1,353
Received 96 Likes on 43 Posts
Default

I had the transmission solenoid replaced and it's fairly inexpensive.


Quick Reply: Transmission issue, Code P0751



All times are GMT -7. The time now is 06:40 AM.