Clock, Hazards, and Passenger Seat Belt Warning Light don't work
03-04-15, 10:04 AM
#16
Rookie
iTrader: (1)
Join Date: Sep 2009
Location: So Cal
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
tcho82. I just swapped out my navigation screen due to touch screen issues and after that was fixed, I am having the same issues as your clock and hazard light not working issues. I was trying to locate a possible "plug specs/indicators' to identify the plugs that you've mentioned were swapped but with no luck.
Can you please explain to me which ones? as in position, color etc... I know only few can be swapped but would be helpful to know before I take out the stereo out again.
Can you please explain to me which ones? as in position, color etc... I know only few can be swapped but would be helpful to know before I take out the stereo out again.
06-12-16, 05:09 PM
#17
Driver School Candidate
Join Date: Jan 2008
Location: NC
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
I just experienced the same thing after performing the DIY fix on my 2008 IS350 Nav. There's a ton of connectors back there, all but two are unique in size/shape/color. If you swap the radio and clock/hazard/airbag wires it'll be obvious as your clock/hazard won't work, and there will be an airbag warning on your dash. Just swap where the connectors are plugged in and you're good.
Thread
Thread Starter
Forum
Replies
Last Post
