IS - 2nd Gen (2006-2013) Discussion about the 2006+ model IS models

Roof spoiler became loose

Thread Tools
 
Search this Thread
 
Old 03-08-14, 12:57 PM
  #16  
my07is350
Pole Position
Thread Starter
iTrader: (8)
 
my07is350's Avatar
 
Join Date: Aug 2010
Location: CA
Posts: 398
Received 2 Likes on 2 Posts
Default

Originally Posted by Initial G
Spend the time to do it right the first time so you don't face unforeseen circumstances in the future.

OP I would just remove the entire spoiler and redo the install with new 3m tape. There is no real short cut to this process. I know some members have tried to use a different type of tape like loctite but the results have varied.

Also I would do it right away. Depending on where you live, I wouldn't want the left side not sticking to the rear glass to be an open invitation for thieves to steal the spoiler.

Good luck.
I should have used the adhesion promoter the first time around then I won't have that problem now OK, will have to wait for a not so busy weekend to start the "big" job.
Old 03-08-14, 01:05 PM
  #17  
510to808
Pole Position
 
510to808's Avatar
 
Join Date: Mar 2013
Location: CA
Posts: 265
Likes: 0
Received 0 Likes on 0 Posts
Default

This is why I ain't put one on yet, even though it looks clean with one
Old 03-08-14, 04:26 PM
  #18  
TTechLexus
Lead Lap
iTrader: (3)
 
TTechLexus's Avatar
 
Join Date: Aug 2011
Location: TEXAS / South Fl
Posts: 565
Likes: 0
Received 1 Like on 1 Post
Default

Stick that bit** on right! I sadly lost mine in the streets of Miami
Old 03-10-14, 05:45 AM
  #19  
Raybean
Pole Position
iTrader: (3)
 
Raybean's Avatar
 
Join Date: Oct 2013
Location: NY
Posts: 340
Likes: 0
Received 0 Likes on 0 Posts
Default

I had mine on for 2 years. Used the 3m tape that came with it. Not really hard to redo it again.
Old 03-10-14, 07:37 AM
  #20  
my07is350
Pole Position
Thread Starter
iTrader: (8)
 
my07is350's Avatar
 
Join Date: Aug 2010
Location: CA
Posts: 398
Received 2 Likes on 2 Posts
Default

Originally Posted by Raybean
I had mine on for 2 years. Used the 3m tape that came with it. Not really hard to redo it again.
No, definitely not hard at all, scraping out the old tape that's what I hate. It's messy because you have to use goo gone in order to remove it thoroughly and be carefully not to scratch it while doing it. I don't know why but the side of the 3M double-sided tape that sticks to the spoiler holds pretty good but the side that sticks to the rear window glass always tends to become loose after a while.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
IS350HKS
IS - 2nd Gen (2006-2013)
18
06-27-10 03:48 PM
e39ng
GS - 3rd Gen (2006-2011)
6
02-12-10 09:37 PM
jadeboy
IS - 2nd Gen (2006-2013)
8
10-16-09 12:56 AM
jadeboy
IS - 2nd Gen (2006-2013)
13
05-10-08 06:21 PM
Papadop88
IS - 1st Gen (2001-2005)
2
03-26-02 06:11 PM



Quick Reply: Roof spoiler became loose



All times are GMT -7. The time now is 09:04 PM.