Lifting IS 250 with a small floor jack
#1
Driver School Candidate
Thread Starter
Join Date: Dec 2013
Location: PA
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Lifting IS 250 with a small floor jack
I have a small 2 ton capacity floor jack that I use to change over snow tires/wheels and the like for all of my vehicles. The jack works well but is designed to only take up one corner of the vehcile at a time.
How are RWD IS owners lifting their vehicles for wheel change over, etc? Are there lift points to take up one corner of the car with a small floor jack? I reviwed the owners manaul on my girlfriend's RWD IS 250 several times and it seemed the only points were in the center of the car to take up the entire front or rear end. I don't have a jack that big and feel more confortable working with one corner of the car lifted at a time.
I was always afraid to take up one corner of the car with my floor jack - even with a hockey puck between the jack and the car. I felt like I was going to damage the uncarriage piece that covers the frame...
Any input is appreciated.
How are RWD IS owners lifting their vehicles for wheel change over, etc? Are there lift points to take up one corner of the car with a small floor jack? I reviwed the owners manaul on my girlfriend's RWD IS 250 several times and it seemed the only points were in the center of the car to take up the entire front or rear end. I don't have a jack that big and feel more confortable working with one corner of the car lifted at a time.
I was always afraid to take up one corner of the car with my floor jack - even with a hockey puck between the jack and the car. I felt like I was going to damage the uncarriage piece that covers the frame...
Any input is appreciated.
Last edited by cxc511; 01-07-14 at 12:50 PM.
#2
Pole Position
iTrader: (1)
https://www.clublexus.com/forums/is-...-on-is250.html
post #3, JoeZ has a diagram
also a DIY
https://www.clublexus.com/forums/gs-...he-car-up.html
post #3, JoeZ has a diagram
also a DIY
https://www.clublexus.com/forums/gs-...he-car-up.html
#4
Lexus Test Driver
iTrader: (1)
Join Date: Jan 2008
Location: Vacaville, CA
Posts: 957
Likes: 0
Received 0 Likes
on
0 Posts
I have a small 2 ton capacity floor jack that I use to change over snow tires/wheels and the like for all of my vehicles. The jack works well but is designed to only take up one corner of the vehcile at a time.
How are RWD IS owners lifting their vehicles for wheel change over, etc? Are there lift points to take up one corner of the car with a small floor jack? I reviwed the owners manaul on my girlfriend's RWD IS 250 several times and it seemed the only points were in the center of the car to take up the entire front or rear end. I don't have a jack that big and feel more confortable working with one corner of the car lifted at a time.
I was always afraid to take up one corner of the car with my floor jack - even with a hockey puck between the jack and the car. I felt like I was going to damage the uncarriage piece that covers the frame...
Any input is appreciated.
How are RWD IS owners lifting their vehicles for wheel change over, etc? Are there lift points to take up one corner of the car with a small floor jack? I reviwed the owners manaul on my girlfriend's RWD IS 250 several times and it seemed the only points were in the center of the car to take up the entire front or rear end. I don't have a jack that big and feel more confortable working with one corner of the car lifted at a time.
I was always afraid to take up one corner of the car with my floor jack - even with a hockey puck between the jack and the car. I felt like I was going to damage the uncarriage piece that covers the frame...
Any input is appreciated.
I use the jack points for rear at the differential and the front the center point listed in the owners manual. Here are a couple of pics, one up on 4 jack stands and one with the jack in the front and two jack stands.
Last edited by jgr7; 01-08-14 at 10:19 PM.
#5
Lexus Test Driver
iTrader: (1)
Join Date: Jan 2008
Location: Vacaville, CA
Posts: 957
Likes: 0
Received 0 Likes
on
0 Posts
Even with the low profile jack now that I am lowered I have to use another floor jack to lift up one side just to get the low jack under to the lift points. Its a pain but I always put jack stands under the car if it is off the ground.
#6
Yeah.. this is why I always installed subframe connectors on all my Mustangs (I've had 4).. so I could jack the car easily and feel confident it would never fall. I don't feel very confident jacking up my car at all right now.
#7
Sorry my question is a little off topic but I wanna ask what kinda jack stand do all of you use or does it matter? The stand that I used have a concave kinda tip and it bents the support position a little and made a crack on sides. So currently when ever I needed the car to be lifted, i would just lift it up and left the jack underneath the car without the stands.
Trending Topics
#8
Lexus Test Driver
iTrader: (1)
Join Date: Jan 2008
Location: Vacaville, CA
Posts: 957
Likes: 0
Received 0 Likes
on
0 Posts
Sorry my question is a little off topic but I wanna ask what kinda jack stand do all of you use or does it matter? The stand that I used have a concave kinda tip and it bents the support position a little and made a crack on sides. So currently when ever I needed the car to be lifted, i would just lift it up and left the jack underneath the car without the stands.
#9
Driver School Candidate
Thread Starter
Join Date: Dec 2013
Location: PA
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the replies. I found the images with the lift points indicated for each corner, but they did not seem to work with my floor jack. I never bothered to pull out the jack from the trunk of the IS, but felt the lift points were perhaps designed specifically for that jack.
There is a local garage nearby that will switch over her wheels for $15, so while I prefer to do this type of thing myself, in this case it seemed easier to use the garage rather than risk damaging the car. Just curious if others had a similar experience.
There is a local garage nearby that will switch over her wheels for $15, so while I prefer to do this type of thing myself, in this case it seemed easier to use the garage rather than risk damaging the car. Just curious if others had a similar experience.
#11
Driver School Candidate
Thread Starter
Join Date: Dec 2013
Location: PA
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Try using this. http://shopfigs.com/v1/index.php?rou...product_id=188
http://www.ecstuning.com/ES251251/
#13
Lexus Champion
iTrader: (1)
I bought this low profile AC Delco 1.5 ton floor jack from o'rileys auto parts. http://www.oreillyauto.com/site/c/de...0768&ppt=C0373
I use the jack points for rear at the differential and the front the center point listed in the owners manual. Here are a couple of pics, one up on 4 jack stands and one with the jack in the front and two jack stands.
I use the jack points for rear at the differential and the front the center point listed in the owners manual. Here are a couple of pics, one up on 4 jack stands and one with the jack in the front and two jack stands.
#14
Racer
iTrader: (2)
1.5 tons is 3000 lbs. 2.5 is 5000 pounds. A 2IS weighs anywhere from 3400-3600 lbs depending on configuration. Peace of mind? Go with a 2.5 ton jack. I wouldn't go with anything less than a 2 ton for a 2IS, IMO anyways. Seems like there's about a $20-30 difference between 2 and 2.5 ton jacks.
#15
Liquid Bra Champion
You’re not actually lifting the ENTIRE weight of the vehicle. At most you’re lifting 1/4-1/2 the vehicle weight. So 1.5t would be plenty for changing a wheel, etc. But yes for nominal price diff, get something sufficient for future use as well. Low (race jacks) always something to look for.
Last edited by TimboIS; 12-27-21 at 04:30 PM.