When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Was changing out my city lights and while I was testing the lights my OEM low beams goes out. First it flickers and then completely shuts off. There was a light burning smell electrical smell. Is this the HID ballast, bulbs, or the wiring problem?
I had the same thing happened to me not too long ago, it turned out to be the bulb, did some investigating into the issue n come to find out it was the wrong watt his bulb that the previous owner put in, so make sure if you're going to get aftermarket hid bulbs make sure they are 35watts n not 55 watts. 55watt hid bulbs will end up melting ur d4s connector which is probably why you smelled something burning Smokyis350
I had the same thing happened to me not too long ago, it turned out to be the bulb, did some investigating into the issue n come to find out it was the wrong watt his bulb that the previous owner put in, so make sure if you're going to get aftermarket hid bulbs make sure they are 35watts n not 55 watts. 55watt hid bulbs will end up melting ur d4s connector which is probably why you smelled something burning Smokyis350
Good to know. But I am using stock HID and ballast.
I might just grab some Garax 6000k D4s bulbs for $90.