TOMMYPHAM

iTrader: (41)

Hi Guys
I thinking about upgrade my front calipers . I would like to ask you a question about is-f front calipers upgrade on is250/350 with out is-f hubs bearing .
Hope someone can answer my question .
Can I just buy 2 front is-f calipers and then buy another after market BBK rotors for is250 ( will same size with is-f )
Will this setup work with out is-f front hubs bearing upgrade ( i understand is-f rotors needed upgrade with is-f front hubs bearing onis250/350 )
Hope you guys can help me

PAVGR

iTrader: (2)

I ve done this 2 years ago.I bought the ISF calipers front and rears and i made in a workshop slotted rotors so that i dont have to use ISF hubs.It costs a little bit more but you dont have to buy the ISF hubs so....


I hope i helped you

PAVGR

iTrader: (2)

Found this closer pic

Gville350

iTrader: (10)

^Can you go into detail about how the rotors were "made" to fit 2IS hub and work with the IS-F caliper?

1FlexedLex

yes more input would be greatly appreciated.

TOMMYPHAM

iTrader: (41)

Yes . More info please .

PAVGR

iTrader: (2)

I just bought the rotors(mine are from a BMW ,same diametre as ISF ).You can buy the rotors from another car(as long they have the same width and everything,much cheaper) and then have a work shop cut the midle ,make aluminium plates and adjust them (by puting the ISF calipers on your car and measure )on your hubs.It is very easy if you have a good work shop do this for you and you can have the rotors done as you want them(i wanted them sloted).I m sorry for my english i hope i helped.You can ask me anything else if i can help

PAVGR

iTrader: (2)

I just bought the rotors(mine are from a BMW ,same diametre as ISF ).You can buy the rotors from another car(as long they have the same width and everything,much cheaper) and then have a work shop cut the midle ,make aluminium plates and adjust them (by puting the ISF calipers on your car and measure )on your hubs so that you dont have to change your offsets and anything else .It is very easy if you have a good work shop do this for you and you can have the rotors done as you want them(i wanted them sloted).I m sorry for my english i hope i helped.You can ask me anything else if i can help

GiantsFan

iTrader: (9)

I'd just pick up the hubs... So you know it works and won't have problems later on.

PAVGR

iTrader: (2)

I thought that to but if you use ISFs hubs you directly change your offsets and i didnt want that plus i wanted slotted rotors and my brakes now are a lot lighter than ISF are.I have them for 2 years and i dont have any promlem.It s up to you guys.I hope i helped