My IS 350 Drift car
#27
Driver School Candidate
Thread Starter
Join Date: May 2013
Location: RUS
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Thank you all very much for the tip!
In Moscow, fewer questions than you))))
I wrote earlier that the car wound up, some issues have been identified, they are removed, and yesterday bruise pump seals, but for 40 minutes it my mechanic replaced, here's the original spare parts.
Completed work on the electrics, everything works except the signal going to press on the accelerator)
As soon as the car later, I'll do professional photos and talk about it all in detail)
The front wings until we made of metal, the experience was on my Silvia S15, which is all of the metal
But later I will be putting the car in plastic.
In the meantime, cut out all that is possible to reduce the weight)
Thanks again for the nice words!
If anyone is in the Instagram find me there just:
pro_service
In Moscow, fewer questions than you))))
I wrote earlier that the car wound up, some issues have been identified, they are removed, and yesterday bruise pump seals, but for 40 minutes it my mechanic replaced, here's the original spare parts.
Completed work on the electrics, everything works except the signal going to press on the accelerator)
As soon as the car later, I'll do professional photos and talk about it all in detail)
The front wings until we made of metal, the experience was on my Silvia S15, which is all of the metal
But later I will be putting the car in plastic.
In the meantime, cut out all that is possible to reduce the weight)
Thanks again for the nice words!
If anyone is in the Instagram find me there just:
pro_service
Last edited by Proservice; 05-13-13 at 01:27 AM.
#30
Driver School Candidate
how did you manage to get IS350 in Mockba?
In Europe countries(for example my Croatia) IS350 is not available and I think in Russia also..
Isn't IS350 only available for USDM?
In Europe countries(for example my Croatia) IS350 is not available and I think in Russia also..
Isn't IS350 only available for USDM?