Camber question.
#1
Driver
Thread Starter
Join Date: Dec 2011
Location: bc
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Camber question.
Hello.
just wondering for our cars... do we need both the Camber arm (rear) and (front) in order to adjust the camber when we lower the ISx50.
rear camber arm
(highlighted red is the rear)
cause I'm a little confused... do we need both the front/rear? or just the rear?
front camber arm
just wondering for our cars... do we need both the Camber arm (rear) and (front) in order to adjust the camber when we lower the ISx50.
rear camber arm
(highlighted red is the rear)
cause I'm a little confused... do we need both the front/rear? or just the rear?
front camber arm
#5
Driver
Thread Starter
Join Date: Dec 2011
Location: bc
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
ughhh...
as u can see on the bottom.
both the REAR UPPER ARM (rear/front) goes in the rear camber.
my question is, do i need both the front and rear assembly?
from what i see at SPC/MEGAN they only carry the REAR assembly....
so im confused as to why CUSCO make the front/rear assembly.. is it beck we need them both??? or is just the rear assembly required?
the rear upper arm (front) is the piece on the right hand side of the arm highlighted in red
as u can see on the bottom.
both the REAR UPPER ARM (rear/front) goes in the rear camber.
my question is, do i need both the front and rear assembly?
from what i see at SPC/MEGAN they only carry the REAR assembly....
so im confused as to why CUSCO make the front/rear assembly.. is it beck we need them both??? or is just the rear assembly required?
the rear upper arm (front) is the piece on the right hand side of the arm highlighted in red
#7
Driver
Thread Starter
Join Date: Dec 2011
Location: bc
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
im not planning to go too low.
im at the stage where im collecting all the suspension part so that when i am ready to install, i install everything at once.
I alrdy have my coilovers, and im trying to pick out a camber kit, and this problem occurred to me.
as for camber, im not looking to go more than -2 or -3
im at the stage where im collecting all the suspension part so that when i am ready to install, i install everything at once.
I alrdy have my coilovers, and im trying to pick out a camber kit, and this problem occurred to me.
as for camber, im not looking to go more than -2 or -3
Trending Topics
#12
^^ Mashina, just out of curiosity. What camber kit are you running on yours? As I've noticed we have similar wheels specs but your rims sit flush to the guard, whilst mine is still poking out and im pretty sure I've maxed my camber too
Thread
Thread Starter
Forum
Replies
Last Post
chrisngo
LS460 / 430 / 400 / 600h Classifieds
0
08-08-09 06:21 PM