The Oil Catch Can Experiment
07-16-14, 05:08 PM
#91
Lead Lap
Thread Starter
-Oil/Sludge getting into random parts of the engine
-Dirty air getting into the engine
-Not sure if the system is pressurized which could cause some issues in the long run.
07-17-14, 09:47 AM
#93
Lexus Test Driver
08-20-14, 12:06 AM
#94
How much oil is everyone getting out of their catch can? I have the Token OCC installed on my vehicle. I just drained it for the first time after 4K miles. There was roughly 1.5-2 oz of oil in it. My vehicle has 80K miles.
08-25-14, 07:38 PM
#100
Driver School Candidate
- summary, this isn't a sales pitch, I don't even have cans to sell right now, its important that people start using OCCs as I don't put a lot of faith in Lexus's "updated pistons and piston rings". My 06 has this update, and my can still catches a crud load of oil every 5K.
I'd pay the premium for a plug and play kit. If anyone has one they'd like to unload, PM me.
09-07-14, 12:46 AM
#103
So bought this ebay one that actually comes with filter and WOW!!! For the price its very impressive very compareable to a Mishimoto, one here are some pics of my set up... And since you can take the can apart I drilled an extra hole and used a rounded bracket to bolt in and then bolted that bracket to another one I mounted on the ECU housing and it looks great.... One other thing because of where I mounted my OCC I had to modify the eng cover to run the lines through as you can see in the pics but this can is well worth the $20 IMO im very surprised its only $20 from the craftmanship and how well its put together with the filter in the middle of the can it should be priced around $100
09-07-14, 06:45 AM
#104
So bought this ebay one that actually comes with filter and WOW!!! For the price its very impressive very compareable to a Mishimoto, one here are some pics of my set up... And since you can take the can apart I drilled an extra hole and used a rounded bracket to bolt in and then bolted that bracket to another one I mounted on the ECU housing and it looks great.... One other thing because of where I mounted my OCC I had to modify the eng cover to run the lines through as you can see in the pics but this can is well worth the $20 IMO im very surprised its only $20 from the craftmanship and how well its put together with the filter in the middle of the can it should be priced around $100
Last edited by Ants350; 09-07-14 at 06:49 AM.