Jacking Points for Oil Change
#1
Pole Position
Thread Starter
iTrader: (5)
Join Date: Sep 2010
Location: CA
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
Jacking Points for Oil Change
Found a youtube video for jacking up the car and placing jack stands.
Are these the right positions? Especially for the jack stand? THanks.
Are these the right positions? Especially for the jack stand? THanks.
Last edited by neomedic; 10-13-12 at 01:52 PM.
#2
Lexus Fanatic
iTrader: (9)
^lower LCA ... yes, I've seen several members here that have done exactly that.
The other option, and what the lexus manual says to do, is to use the spot welds (on the side skirts where the scissor jack goes), but you need a custom adapter to get you jack stands to fit properly (You don't want to bend it)
... I want to make something like this: (Got this from the mustang forums)
The other option, and what the lexus manual says to do, is to use the spot welds (on the side skirts where the scissor jack goes), but you need a custom adapter to get you jack stands to fit properly (You don't want to bend it)
... I want to make something like this: (Got this from the mustang forums)
Last edited by GiantsFan; 10-13-12 at 02:18 PM.
Thread
Thread Starter
Forum
Replies
Last Post