B16da9

iTrader: (7)

CCD Yellow RCA Input - Connected this to the RCA output on the camera
That's correct

REVERSE wire (Blue) - Not sure what to do with this? should i ground or connect to 12v?
This is the signal wire that tell the unit to switch to the reverse camera input. Connect this wire to the positive on the reverse lights

CCD + 12v wire - Not sure what to do with this either...
This is the power source for the camera, connect the positive to the positive on the reverse lights as wire as the signal wire and the negative to the negative on the reverse lights

pmanliu

iTrader: (4)

^ Thanks a bunch!

pmanliu

iTrader: (4)

My pleasure. Thanks for all your help with the unit and troubleshooting.

If anyone has a start up screen idea they want created, let me know your thoughts and i'll see what i can make in my free time!

IamNate

Alright all those that have purchased this unit I need some help. I need an MCU update for my unit and the only way to get this is to contact the supplier, the problem is the person I have been in contact with no longer responds to my emails. Could any of you try to contact the person you purchased your unit through and see if you can get a MCU update file for your unit please? The file type is s19 or .s19. Thanks

chi123

iTrader: (12)

Where have you guys been buying the units from? The prices I see are almost $1000 for one of these now when they use to be like $600!

felo2081

Lsqbusiness.com

felo2081

iPhone docking station

eightysix

Has anyone got some custom skins / themes ?
the 3 standard ones are sooo ugly

this is my startup logo if anyone wants, great quality

knbnguyen

So I guess i'm late since i just came across this MCU update for the unit... is there one? and could anyone post it up?

J250

iTrader: (13)

I did exactly as what you said and also made sure it's the correct size and BIT but do you know why i'm getting this message?

TUNG

iTrader: (2)

Go back to ur sd card and delete the logo, since its successfully uploaded on there already. So once you delete it, it should be up

Stavros

I spent some time trying to alter the original images, I agree with you they are very dated/ugly.
Unfortunately, I didn't get too far, I need to spend more time.

Nice logo by the way, thanks. I'll post some menu files during the weekend.

J250

iTrader: (13)

Still doesn't work .. I even adjusted the height to 380 and keeping 24bit but still pops up the same message

felo2081

When it uploads it will say upload success. I used the pic iamnate posted in page 34.

pmanliu

iTrader: (4)

Thats odd, i'm at work but will go home and double check the file. You saved it as a bitmap right instead of just renaming it bitmap?

I'll upload the file directly and hopefully that works