Fearnside

Everyone seems to be more than happy to assist in the post I have been searching but nothing was directly related to my issue, so I decided to register and plead for help. I promised I searched up and down CL and could not find a DIY to wire up or change the light on the floorboard. I just got my 250 and have been trying to change all the interior lights LED blue. Can anyone please help?

robertrios

iTrader: (11)

what color are your illuminated door sills...mine are blue....i want white when i say what color i mean the plastic housing mine is tan. We could trade!

Sffd103

iTrader: (16)

do you mean underneath the dash by your feet or at the door sill when you open up the door?

Fearnside

Underneath the dash,it's white right now but I bought some LED strips and need to somehow wire them up, or if there is an easier way, I'm all ers

Fearnside

My door lightsbare white with a red cover. I was told you can order a different color lens from precisionled.com. They actually helped out alot with the install of my puddle lights

Fearnside

Sorry for the typos I'm on the iPad lol

Fearnside

Thanks to ng123ray, I found some pics on how to change the floorwell light. The only hard part is popping out the light and removing it from the connector. From there it was pretty easy.

]




There are two screws on the driver side dash, remove those and partially remove the dash so you have more room to work with. From there, just push UP hard on the LED untill it pops free. It will take some maneuvering but from there you can pull the whole LED assembley out.



From there just unplug it.



I ended up taking a small flat head and removed the black peice where the light is connected.



Inside is a capacitor and diode, i clipped those and removed the leads from the LED so i can still use the orginal plug. I will try to post more detailed pictures once i get a chance. Hope this was helpfull!

NickawdIs

iTrader: (1)

where can i get this bulb ?