Simple/cheap debadge plugs?
#16
Lexus Champion
iTrader: (2)
i went budget on this. since by car is black onyx i got some gloss black vinyl, hole punched it, then used the circular vinyl pieces that the hole punch made, and slappped it on. its easy, cheap, reversible, and passes the 3 foot test.
i guess you can do the same by using touch up paint on the vinyl to match your car and hole punching in.
i guess you can do the same by using touch up paint on the vinyl to match your car and hole punching in.
#17
Pole Position
Thread Starter
iTrader: (8)
Join Date: Apr 2011
Location: Ca
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
Looks fine without the holes haha. Idk, it might eventually bother me, but my car is sgm so it should show even less. I might just leave it there and mb epoxy + touch up paint it later. Thanks guys haha. I'll probably debadge this weekend.
#21
Lead Lap
iTrader: (1)
Join Date: Jan 2009
Location: TX
Posts: 598
Likes: 0
Received 0 Likes
on
0 Posts
I've commented on a few posts like this. I covered my holes because i didnt want rust issues or rain to get into my trunk with all my audio/video.
I just took a lot of small pieces of tape and taped around the teeny circle. I bought a bottle of white paintable caulk for cheap at lowes/home depot. Squirt it in there, quickly before it dries take a razor or something and smooth it out. Use a dab of touch up paint/clear coat. My only issue was sometimes I might have waited a little long and when I evened with a razor blade it'd pull some out of the hole, etc. etc. but if you're quick it should take 30 min and 20 bucks tops. I can tell that I filled it with something if you put your face up to it but, whatever.
I just took a lot of small pieces of tape and taped around the teeny circle. I bought a bottle of white paintable caulk for cheap at lowes/home depot. Squirt it in there, quickly before it dries take a razor or something and smooth it out. Use a dab of touch up paint/clear coat. My only issue was sometimes I might have waited a little long and when I evened with a razor blade it'd pull some out of the hole, etc. etc. but if you're quick it should take 30 min and 20 bucks tops. I can tell that I filled it with something if you put your face up to it but, whatever.
#22
Lexus Fanatic
iTrader: (1)
I'm gonna try debadging mine next month, i'm trying something different, hope it works, will post up if it looks clean!
Thread
Thread Starter
Forum
Replies
Last Post