Window Auto-Up Question?
#1
Rookie
Thread Starter
iTrader: (1)
Join Date: Jan 2010
Location: Washington
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Window Auto-Up Question?
So i just finished installing the AVS visors for my gf's IS250 (2010). And let me tell you the fitment for the fronts are .. I had to sand down some sections for it to fit and for the window not to hit the visors..but anyways, after installing the driver side visor. The Auto-up function works but as it makes its way up, it gets pass half-way then the window jumps back down. Like it's hitting something on the way...I can close the window all the way up though if i do it slowly (not AUTO). I clean the are and checked all for any loose junks but nothing. So I'm at lost to what had happened, any ideas or suggestions guys?
Last edited by Mrbanhbao; 08-09-11 at 06:44 PM.
#5
Rookie
Thread Starter
iTrader: (1)
Join Date: Jan 2010
Location: Washington
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
okay i looked around the forum and tried the window reset trick. And i dont know if i did it right or not but the window is back to normal again. haha so she is really relief .. i'll try to post some pictures of the install.
Thread
Thread Starter
Forum
Replies
Last Post
Rosson3ri
ES - 1st to 4th Gen (1990-2006)
1
10-07-12 02:50 AM