ApokC

Totally just realized this... what do I do about the back up camera???

Im getting this trunk in a couple days:

http://www.seiboncarbon.com/products...ds/TL0607LXIS/

And the emblems are easy to remove, trunk is easy to install... but I'm pretty sure there's no slot for the back up camera. Has anyone put the camera in the CF trunk before?

Thanks!

*Please don't hate on the CF, if you don't like it I don't care. You're opinion is useless

A_Grasso

iTrader: (13)

You can cut a hole for the reverse camera. I just didn't want to go through the hassle so I sold mine a while back haha. Call tommy; I'm sure he can help you out

Sffd103

iTrader: (16)

Should be easy to drill, but if you're not comfortable I'd call a professional. You don't want to mess up your new trunk because you were too cheap to pay someone to do it right.

ApokC

I cant find any pics of other members with CF trunks. You guys know of any?

montgb

iTrader: (7)

I have the Seibon trunk and I cut a square to put the backup camera. Works perfectly, and no one can see that the square isn't the prettiest.

There are a couple pictures of my trunk floating around Club Lexus somewhere.

montgb

iTrader: (7)

When in doubt, trust in Rashoodz.

https://www.clublexus.com/forums/is-...-bodykits.html

ApokC

Montgb u should find them and repost

What'd u use a dremel?

Gville350

iTrader: (10)

A Dremel would probably be easiest. Tape the outline of what you need cut, and personally I'd use a Tungsten Carbine cutter attachment, and go to town. Since that area is really not easily seen, the cuts won't have to be perfect...but the lines of the tape should help generally guide you.

GL!

ApokC

Thank you guys! I'll post pictures soon. Hopefully tomorrow

OUFanatic

I was thinkin bout doin a trunk but wasn't sure if I could do it. Can't wait to see your pics!

ApokC

I pick up the trunk tomorrow and install it Thursday. Ill let ya know how it goes and post pics

A_Grasso

iTrader: (13)

Should be interesting to see

montgb

iTrader: (7)

Take your time to get the fitment right. It takes a lot of small adjustments to get it looking proper.

ApokC

Oh definitely. It must look perfect or else Ima be unsatisfied

ApokC

Would anyone be interested in a REPLACING TRUNK DIY?

or is there already one... idunno