Got my Wheels on - Axis Power 20's
06-09-11, 07:13 AM
#17
Nice wheels, I did some fitment testing with these for Axis... I really liked them and was pretty close to getting them (but in gun metal). They'll look sick once you lower it... here's my car with these wheels but dropped on Tein S-techs.
06-09-11, 01:14 PM
#19
Driver School Candidate
Thread Starter
Join Date: Mar 2011
Location: Ohio
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
These are the pics that made me want these wheels.
06-09-11, 01:18 PM
#20
Driver School Candidate
Thread Starter
Join Date: Mar 2011
Location: Ohio
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
And I also wanted gun metal 19s originally but couldn't find them anywere.. these were the only size/color I could find anywhere (got the last set b2 had) and got them for what I thought was too goo a deal to pass up - under 1800 shipped with tires. And they let me mail them some tpms sensors to put on.
06-10-11, 02:26 AM
#21
Any rubbing front and back with that setup?
06-10-11, 02:36 PM
#23
Driver School Candidate
Thread Starter
Join Date: Mar 2011
Location: Ohio
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
No rubbing at all on stock suspension. Got my eibach pro kit going on tomorrow. Just from looking at how everything lines up right now i think i will probably clear the rear fender by about 1/4 inch. Not sure about the front. Maybe some while turning hard, but that should be it. hopefully...
06-11-11, 04:06 PM
#24
Driver School Candidate
Thread Starter
Join Date: Mar 2011
Location: Ohio
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Got the springs installed today. before and after pics here:
https://www.clublexus.com/forums/sus...ml#post6456776
https://www.clublexus.com/forums/sus...ml#post6456776
Thread
Thread Starter
Forum
Replies
Last Post
