Getting Service Done at Lexus with Lowered Car
#1
Getting Service Done at Lexus with Lowered Car
Just got a recall notice on my car about the Fuel Pressure Sensor, and was just wondering for those who have lowered cars do you guys leave it lowered when you guys bring the car in for service? or do you raise it back up?
#3
no need to adjust..
all they're doing anyways is just tightening the fuel pressure sensor a total of 10 degrees. lol
waste of time i say... if anythng they will replace the fuel pressure sensor gasket (pn: 90430-12026)
tools needed for this repair:
standard hand tools
torque wrench
torque wrench adaptor
union nut wrench 24mm
and inspection mirror.
shop supplies needed:
brake cleaner
protective tape
if is250:
dealer will re use your cold start injector gasket (pn: 23293-31010) and air surge tank gasket ( pn: 17176-31050)
all they're doing anyways is just tightening the fuel pressure sensor a total of 10 degrees. lol
waste of time i say... if anythng they will replace the fuel pressure sensor gasket (pn: 90430-12026)
tools needed for this repair:
standard hand tools
torque wrench
torque wrench adaptor
union nut wrench 24mm
and inspection mirror.
shop supplies needed:
brake cleaner
protective tape
if is250:
dealer will re use your cold start injector gasket (pn: 23293-31010) and air surge tank gasket ( pn: 17176-31050)
#5
Racer
iTrader: (2)
no need to adjust..
all they're doing anyways is just tightening the fuel pressure sensor a total of 10 degrees. lol
waste of time i say... if anythng they will replace the fuel pressure sensor gasket (pn: 90430-12026)
tools needed for this repair:
standard hand tools
torque wrench
torque wrench adaptor
union nut wrench 24mm
and inspection mirror.
shop supplies needed:
brake cleaner
protective tape
if is250:
dealer will re use your cold start injector gasket (pn: 23293-31010) and air surge tank gasket ( pn: 17176-31050)
all they're doing anyways is just tightening the fuel pressure sensor a total of 10 degrees. lol
waste of time i say... if anythng they will replace the fuel pressure sensor gasket (pn: 90430-12026)
tools needed for this repair:
standard hand tools
torque wrench
torque wrench adaptor
union nut wrench 24mm
and inspection mirror.
shop supplies needed:
brake cleaner
protective tape
if is250:
dealer will re use your cold start injector gasket (pn: 23293-31010) and air surge tank gasket ( pn: 17176-31050)
Trending Topics
#11
Driver School Candidate
Join Date: Jan 2008
Location: Oregon
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
fuel pressure sensor diagram
no need to adjust..
all they're doing anyways is just tightening the fuel pressure sensor a total of 10 degrees. lol
waste of time i say... if anythng they will replace the fuel pressure sensor gasket (pn: 90430-12026)
tools needed for this repair:
standard hand tools
torque wrench
torque wrench adaptor
union nut wrench 24mm
and inspection mirror.
shop supplies needed:
brake cleaner
protective tape
if is250:
dealer will re use your cold start injector gasket (pn: 23293-31010) and air surge tank gasket ( pn: 17176-31050)
all they're doing anyways is just tightening the fuel pressure sensor a total of 10 degrees. lol
waste of time i say... if anythng they will replace the fuel pressure sensor gasket (pn: 90430-12026)
tools needed for this repair:
standard hand tools
torque wrench
torque wrench adaptor
union nut wrench 24mm
and inspection mirror.
shop supplies needed:
brake cleaner
protective tape
if is250:
dealer will re use your cold start injector gasket (pn: 23293-31010) and air surge tank gasket ( pn: 17176-31050)
Thread
Thread Starter
Forum
Replies
Last Post
HS805
IS - 2nd Gen (2006-2013)
2
05-15-19 11:55 AM
huyz13
IS - 2nd Gen (2006-2013)
19
08-16-16 06:50 AM
350stew
IS - 2nd Gen (2006-2013)
0
10-23-13 05:31 PM