actv8d

ok from researching on this forum i have collected some info so far.

so im going to be running this seyup:

19x9.5 +22
19x10.5 +22

so i figured i am able to run a 245/35 on the rear with a rolled guard (no pull) and it seems i have to run a 225/35 on the front. BUT can i run a 235/35 on the front with my front guards rolled and no rub? i dont want to go stupidly low.. like i want the guard to sit on the top on the tire

Sffd103

iTrader: (16)

ask MV350 in the aggressive wheel fitment thread.

IS25Heaven

iTrader: (8)

u are tripping.
with no rub? u can prob do that with lots of rubs and a camber kit.
8.5+22 and 9.5+17 on 225/35 and 235/19 rubs on big dips. since u are thinking about going an inch bigger u should get a pull at least.

actv8d

no im not "tripping", ive gathered info off this forum.. have u had experience with this size of wheel and tire combo or u just talking what u THINK is right?

datplayaz

iTrader: (9)

it depends on how low you are, but you'll most like rub and will need to pull in the rear and 235/35 is too big for the front.

Sffd103

iTrader: (16)

I think you'll be happier with a 215 up front and mabe a 9 inch wheel in front. The front gives the most problems, but I like it low.