2011 Headlights (merged threads)
#316
#324
Driver School Candidate
Join Date: Feb 2011
Location: WA
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Halogen to HID 2011 headlights from Sewell - manual level adjustment not available
Hey guys, I've just installed the Halogen to HID 2011 headlight from Sewell - it looks great with the LED strip and all...
One problem though - I've lost the ability to manually level the headlights from the manual headlight levelling dial on the dash - which was working previously for my old 2006 halogen headlights.
It's not too much of a problem at the moment because it appears to be set at the lowest level (i.e. setting 0). However, if I were to have a full car and/or be carrying cargo in the trunk then the headlights would obviously pitch upwards at oncoming traffic. I would then have no easy means of adjusting the tilt of the HID headlights.
I've read in this thread that auto headlight levelling is available on the 2011 headlights. I assume that this is managed through the AFS computer, which is not available on my vehicle. Surely it must be the same inputs or wires to control the servos/motors that guide the pitch of the headlights? (i.e. the manual headlight level adjustment dial should send the same commands to the servos/motors and operate in the same way - but manually).
So why is the manual headlight level adjustment not working?
What am I missing here? Has anyone else experienced this? Help!!!
One problem though - I've lost the ability to manually level the headlights from the manual headlight levelling dial on the dash - which was working previously for my old 2006 halogen headlights.
It's not too much of a problem at the moment because it appears to be set at the lowest level (i.e. setting 0). However, if I were to have a full car and/or be carrying cargo in the trunk then the headlights would obviously pitch upwards at oncoming traffic. I would then have no easy means of adjusting the tilt of the HID headlights.
I've read in this thread that auto headlight levelling is available on the 2011 headlights. I assume that this is managed through the AFS computer, which is not available on my vehicle. Surely it must be the same inputs or wires to control the servos/motors that guide the pitch of the headlights? (i.e. the manual headlight level adjustment dial should send the same commands to the servos/motors and operate in the same way - but manually).
So why is the manual headlight level adjustment not working?
What am I missing here? Has anyone else experienced this? Help!!!
#325
sorry to just barge in on a thread, but are Sewell MY2011HID Lights plug n play with the 2007 HID IS250 lights? and if a 2007 has HID and AFS from lexus are the 2011 the same as well?
#326
Lead Lap
iTrader: (8)
The only thing thats plug and play is the outside main connection to headlight, you have to either buy a new set of ballast or reuse your old ones, which means you have to cut the 2 wires that plug to the back of the hid bulb and reconnect them, ( at least i had to do on mine because theres no way to remove the bulb connection out of the old headlights without cutting it ) i had the AFS. Also you have to cut around the headlight brackets where the new headlights have a bigger bulge on the bottom and wont fit properly with the old brackets. its really not hard at all, just time consuming...however i wish sewell would mention that on their site..if you get them, let me know if you have any questions on it.
Last edited by Deathrow23; 07-16-11 at 11:03 AM.
#327
Driver School Candidate
Join Date: May 2008
Location: NSW Sydney
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
The only thing thats plug and play is the outside main connection to headlight, you have to either buy a new set of ballast or reuse your old ones, which means you have to cut the 2 wires that plug to the back of the hid bulb and reconnect them, ( at least i had to do on mine because theres no way to remove the bulb connection out of the old headlights without cutting it ) i had the AFS. Also you have to cut around the headlight brackets where the new headlights have a bigger bulge on the bottom and wont fit properly with the old brackets. its really not hard at all, just time consuming...however i wish sewell would mention that on their site..if you get them, let me know if you have any questions on it.
Iam planing to purchase the lights from Sewell, HID-HID, my car is 2008 model, can you list what modifications you needed to do in order to make it fit on ur car?
(ALSO are you experiencing the NEW head light bubbling issue mentioned on other threads ?)
Thanks!
#328
Lead Lap
iTrader: (8)
Hi, Deathrow, So have you installed the NEw MY11 LED head lamp on ur IS ?
Iam planing to purchase the lights from Sewell, HID-HID, my car is 2008 model, can you list what modifications you needed to do in order to make it fit on ur car?
(ALSO are you experiencing the NEW head light bubbling issue mentioned on other threads ?)
Thanks!
Iam planing to purchase the lights from Sewell, HID-HID, my car is 2008 model, can you list what modifications you needed to do in order to make it fit on ur car?
(ALSO are you experiencing the NEW head light bubbling issue mentioned on other threads ?)
Thanks!
#329
Hey guys, I've just installed the Halogen to HID 2011 headlight from Sewell - it looks great with the LED strip and all...
One problem though - I've lost the ability to manually level the headlights from the manual headlight levelling dial on the dash - which was working previously for my old 2006 halogen headlights.
It's not too much of a problem at the moment because it appears to be set at the lowest level (i.e. setting 0). However, if I were to have a full car and/or be carrying cargo in the trunk then the headlights would obviously pitch upwards at oncoming traffic. I would then have no easy means of adjusting the tilt of the HID headlights.
I've read in this thread that auto headlight levelling is available on the 2011 headlights. I assume that this is managed through the AFS computer, which is not available on my vehicle. Surely it must be the same inputs or wires to control the servos/motors that guide the pitch of the headlights? (i.e. the manual headlight level adjustment dial should send the same commands to the servos/motors and operate in the same way - but manually).
So why is the manual headlight level adjustment not working?
What am I missing here? Has anyone else experienced this? Help!!!
One problem though - I've lost the ability to manually level the headlights from the manual headlight levelling dial on the dash - which was working previously for my old 2006 halogen headlights.
It's not too much of a problem at the moment because it appears to be set at the lowest level (i.e. setting 0). However, if I were to have a full car and/or be carrying cargo in the trunk then the headlights would obviously pitch upwards at oncoming traffic. I would then have no easy means of adjusting the tilt of the HID headlights.
I've read in this thread that auto headlight levelling is available on the 2011 headlights. I assume that this is managed through the AFS computer, which is not available on my vehicle. Surely it must be the same inputs or wires to control the servos/motors that guide the pitch of the headlights? (i.e. the manual headlight level adjustment dial should send the same commands to the servos/motors and operate in the same way - but manually).
So why is the manual headlight level adjustment not working?
What am I missing here? Has anyone else experienced this? Help!!!
#330
The LEDs on DRL brightness look like something in between 4300k and 5000k in person to me. Not sure the exact color or even how to find out.