Will those Wheels Fit an IS250 AWD - Part Uno
#406
Driver School Candidate
Join Date: Feb 2015
Location: Alabama
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
I browsed through this thread, but I'm at work and couldn't read every post, so if this size has been posted already I apologize. Just wanting to know if 18x9.5 +38 would fit all the way around. No drop yet, but will be dropped on coilovers to eliminate wheel gap eventually, but without tucking the tire much, if at all. Thanks guys
#408
Driver School Candidate
Join Date: Feb 2015
Location: Alabama
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
yeah I didn't quite make it to page 26 while dodging the boss. haha. thanks! i was looking at running a 245/35 or 245/40. the wheels i'm looking at also have an 18x8.5 set. looked like the guy you reference was having some issues rubbing on the front. thanks again!
#409
Driver School Candidate
Join Date: Feb 2015
Location: Alabama
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
I seem to be the only one posting in this thread lately Oh well....but I've narrowed down my wheel choices to 18x9.5 +40 with 245/40 all around or 18x9 +32 with 235/40 all around. Kind of weird offset options mostly because I love the TSW Nurburgring wheels in the matte bronze and thats all I can find that they come in as far as the diameter and width. I'm 95.7% sure they both will fit with no rubbing/fender rolling(correct me if I'm wrong), but which do you guys think will look better?
EDIT: the car is factory height as of right now, but I will eventually be lowering it on coilovers
EDIT: the car is factory height as of right now, but I will eventually be lowering it on coilovers
Last edited by mn011890; 02-24-15 at 03:59 PM.
#410
Question on fitment
2009 lexus is250 rear wheel drive
19x9.5 +22 fronts
19x11 +25 rear
What tire sizes should i go with
I'm rolling my fenders all around
Need help asap please ordered my
Rims already no camber kit
2009 lexus is250 rear wheel drive
19x9.5 +22 fronts
19x11 +25 rear
What tire sizes should i go with
I'm rolling my fenders all around
Need help asap please ordered my
Rims already no camber kit
#411
Driver School Candidate
Join Date: Jun 2014
Location: ON
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Wheel spec
Can someone give me good specs to run 19" rims on for a 06 AWD IS250. Would 19x9.5 be ok? with 235/35/19 front and 265/35/19 back. +35mm offset? suggestions?
#413
Driver School Candidate
Join Date: Jun 2014
Location: ON
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Not planning on lowering anytime soon. Should I go 19x9 front and 19x9.5 rear to be safe with those provided tire specs?
#415
Driver School Candidate
Join Date: Jun 2014
Location: ON
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Not sure the exact offset, but I think it will be in the 30s. Any recommended offset to run? I know that wheel gap will drive me crazy so I might get coilovers later on. Thanks for the help.
#416
Driver School Candidate
Join Date: Mar 2015
Location: uae
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
I am having lexus is300 RWD 3.0 litre GULF Spec
I am looking to change my stock 17 inch wheels
Rear:245/45 R17
Front:225/45 R17
looking for avant grade m310 dolpin grey 19 inch
-should i change the suspenion first to fit the new wheels
-Should i lower the car to fit the new wheels
-Can i put on the 19inch wheels with the stock suspention and it will look good
-If i lower the car does it rub and hurt the fenders
Please guide me as i am normal driver looking for new look without sacrifice the comfort
Please advise
Thank you
I am looking to change my stock 17 inch wheels
Rear:245/45 R17
Front:225/45 R17
looking for avant grade m310 dolpin grey 19 inch
-should i change the suspenion first to fit the new wheels
-Should i lower the car to fit the new wheels
-Can i put on the 19inch wheels with the stock suspention and it will look good
-If i lower the car does it rub and hurt the fenders
Please guide me as i am normal driver looking for new look without sacrifice the comfort
Please advise
Thank you
#417
Lead Lap
iTrader: (8)
I'm looking to upgrade my stock 17's on my 350 AWD.
I'm thinking of running either:
19x8.5 with 225/35/19 (square) or
18x8.5 with 225/40/18 (square)
I've looked and haven't found anything that would indicate there would be any rubbing, what offset would be needed to clear the larger brakes on the 350.
I'm thinking of running either:
19x8.5 with 225/35/19 (square) or
18x8.5 with 225/40/18 (square)
I've looked and haven't found anything that would indicate there would be any rubbing, what offset would be needed to clear the larger brakes on the 350.
#418
Pole Position
iTrader: (2)
Join Date: May 2014
Location: nj
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
niche Verona 19s
My str607s are trashed so I'm looking at getting a set of 19x8.5 front 19x9.5 rear niche Verona m150 black wheels on my is250 awd... Will I have any rubbing issues with these rims on 235/35/19 front 255/35/19 rear? I have f sport springs...Any help would be greatly appreciated... Thanks
#419
Pole Position
iTrader: (1)
My str607s are trashed so I'm looking at getting a set of 19x8.5 front 19x9.5 rear niche Verona m150 black wheels on my is250 awd... Will I have any rubbing issues with these rims on 235/35/19 front 255/35/19 rear? I have f sport springs...Any help would be greatly appreciated... Thanks
the fronts are fine
How low is your car?