takadakeyo

Quick question. Will stock 17" is300 wheels fit a RWD Is250?

anthony206

iTrader: (2)

Anyone can help me out My friend is letting me try on he wheel with the offset i want on my car. wheel are 18x8 and 18x10 with +25 all around. What kind of fender modding, will I need ? and best tires setup

Thanks in advance guy !!!

chase350

iTrader: (2)

what sizes tires??

anthony206

iTrader: (2)

The wheel is at he house right now. I don't remember on top of my head. The wheel is current running stretch tires thou. But 25+ work on our is ?

MyIS350G

iTrader: (6)

You need to give more info..
oem height, springs, coils..

anthony206

iTrader: (2)

Sorry i'm a newbie to this thing lol. I am currently drop on Megan ez coil with 1 finger gap to te fender.

MyIS350G

iTrader: (6)

Just run 225/35/18 and 245 or 255/35/18 roll your fenders and you should be fine

Tkshu22

Will 19x8.5 27 offset and 19x9.5 46 offset fit on a IS350? Will there be any rubbing or issues of I lower aprox. 1"?

anthony206

iTrader: (2)

thanks for you help. Another question. You think I will be fine just rolling the fender or should i also run camber on the back ? Would I have any rubbing issued ?

infate

iTrader: (5)

I'm planning to get some wheels in the near future and planning on either getting

19x9 +35 or +25 215 or 225 /35/19
19x10 +35 or +25 235 or 245 /35/19

Dropping it to no wheel gap on BCRs.

What fender mods would I need? Which setup out of a possible of four would be best to get a flush look w/ fender mods, but no rub or at least to a minimal?

Which tires should I run?

Will I run into any issues with any of the specs above if I plan on installing a BBK in the future?

Haha. Thanks guise.

edgeucated

iTrader: (4)

I am on KW V3 right now and looking to drop to about 1 finger gap. What kind of fender work am I looking at if I want to fit:

19x9.5 + 25 with 235/35
19x10 + 31 and 265/30

Can i get by with just rolling and natural pulling? Would it be possible to avoid camber arms and tab relocation?

maximL

iTrader: (2)

You will not need camber arms, but tab relocation will probably be necessary unless you're ok with the sound of rubbing.

Peker

iTrader: (1)

Kinda tired of reading so I will just ask,I have an is250 RWD with H&R springs the wheels Im looking into come in 19x8.5 35offset and 19x9.5 38 offset what size tire should I go with and will It rub?

ShawnD

Stock height (for now ) 06 IS350. My friend haD a '13 4GS Fsport, but he recently traded for a GTR.

He bought the Vossen CV7s with 10.5 rear. Standard offset. Will these work on my 2IS?

ShawnD

Any help??????