When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I am sincerely sorry,I honestly don't know anything about wheels.Could you explain to me what the numbers mean.I know what the first 3 numbers mean at least.
Also,I'll try to supply more info.But could I run F:19x9 R:19:10
I would like to get the Advan RS and those are the only sizes with the right bolt pattern.
I believe Advans RS 19x9 comes in +38, +29, +22. The 19x10 comes in +35, +25, +15. I'm running +22 in front, +25 in back. They poke out, but barely so. Just for reference.
I believe Advans RS 19x9 comes in +38, +29, +22. The 19x10 comes in +35, +25, +15. I'm running +22 in front, +25 in back. They poke out, but barely so. Just for reference.
That's what I was thinking of getting actually!Could you possibly send me a pic of what it looks like on your car?I really want a concave look.
Edit:Thank you for helping me out,I've decided on the same specs that you're running,and I'll work my way from there.Thanks!
roll your fenders, figure out how flush or how muhc poke you want and ill tell you what to do..... until you find, widths, height, and some what how you want it we cant help
here is a start
most aggressive without mods
19x8.5+30 215/35
19x9.5+32 235/35
without pull
19x9.5/10.5+22 225/35 245/35
after those sets the mods become heavier and needed/
Hi MV350
i'm aftering a set of 19x9.5/10.5+22
but what do you mean by without pull?
also will i have to roll my fenders if i use 225/35 235/35 tyres with lowered about 2"
thanks
Hi MV350
i'm aftering a set of 19x9.5/10.5+22
but what do you mean by without pull?
also will i have to roll my fenders if i use 225/35 235/35 tyres with lowered about 2"
thanks
without pull = no pulling of the fenders to accomodate wider wheels and/or wheels w/ aggressive (low) offsets.
and yes, you will have to roll your fenders if you use those tires on those wheels (bolded for emphasis).
thanks projectdna
so that mean i need to roll the inner guards of the fender
but i dun need to pull the actual panel of the fender out
right?
that is correct.
a typical fender roll will lightly "pull" your fenders out anyways. you can't really tell from just looking at it, since it will be just a few millimeters.
what Mv350 was referring to was (probably?) something more visually noticeable.
nice!!!! but i think i will get "pull" over by the cop in australia if i had that kinda of wheel fitment, sigh i think i need to go with a +35 offset
you can go with +22 itll fit like this, above it way aggressive, a lot more so than 19x9.5/10.5+22
with a tad more camber and a tad more low itll fit perfect with a little bit of poke, this only requires rolling your fenders. run a 225/35 front and a 235/35 or 265/30 in the rear.
What size tires for 19X9+22 and 19X10+25,stock height as of now,not sure if that plays a role in deciding tires.Wanting to know,so I can just order the tires at the same time.