Will those wheels fit? START HERE.
#1847
i have a set of tires 235/35R19 that are from my friend 235/35R19
i wonder if i can run 19x9 +35 front and 19x9 +25 rear
any fender modding needed? will it look odd? i'm now lowered on f sport and probably get tein coilover later in the future.
i wonder if i can run 19x9 +35 front and 19x9 +25 rear
any fender modding needed? will it look odd? i'm now lowered on f sport and probably get tein coilover later in the future.
#1848
Driver School Candidate
Join Date: Oct 2009
Location: BC
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
18x8.5 F +45
18x9.5 R +50
2007 IS350
225/40 front, 255/40 rear.
Will it fit? I used the 1010 calculator and it says 6mm closer in the front (inboard) and 13mm inboard on the rear.
18x9.5 R +50
2007 IS350
225/40 front, 255/40 rear.
Will it fit? I used the 1010 calculator and it says 6mm closer in the front (inboard) and 13mm inboard on the rear.
#1851
Ok so I've found a killer deal on a set of wheels I like for my IS350 but I have to decide which offsets to go with. They are 19x9 and 19x10 available in +25,+35, and +45 offsets. My car is lowered on tein s-techs. Which offsets would be a good compromise between form and function? I don't want to have to cut or roll my fenders if at all possible.
#1852
Lead Lap
iTrader: (1)
Join Date: Jul 2006
Location: illinois
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
Ok so I've found a killer deal on a set of wheels I like for my IS350 but I have to decide which offsets to go with. They are 19x9 and 19x10 available in +25,+35, and +45 offsets. My car is lowered on tein s-techs. Which offsets would be a good compromise between form and function? I don't want to have to cut or roll my fenders if at all possible.
#1854
Lexus Test Driver
iTrader: (23)
Ok so I've found a killer deal on a set of wheels I like for my IS350 but I have to decide which offsets to go with. They are 19x9 and 19x10 available in +25,+35, and +45 offsets. My car is lowered on tein s-techs. Which offsets would be a good compromise between form and function? I don't want to have to cut or roll my fenders if at all possible.
itll fit no prob
#1856
I searched the thread and could not find anyone who has asked about the 19" OEM RX8 wheel.
Would those fit an IS350? I have seen the Genesis Track wheels and thought they looked sharp, but I like the RX8's a little more aesthetically.
Looking at these in particular: http://images.thecarconnection.com/l...00189757_l.jpg
Of course I would change the center cap.
Thoughts...
Would those fit an IS350? I have seen the Genesis Track wheels and thought they looked sharp, but I like the RX8's a little more aesthetically.
Looking at these in particular: http://images.thecarconnection.com/l...00189757_l.jpg
Of course I would change the center cap.
Thoughts...
#1857
Lexus Champion
iTrader: (28)
sup guys, I see most people talking about +31 is the craziest u could go out back on the 2IS with out fender mods..
however this is what I got in mind..
18/8.5 +30
18/10 +25
Tires are
235/40/18
255/40/18
Will I have rubbing issues. if yes where ? front ? back ? I plan on lowering on Coils, prob megan...
Will I have to roll fenders for the +25 in the rear? thanks
however this is what I got in mind..
18/8.5 +30
18/10 +25
Tires are
235/40/18
255/40/18
Will I have rubbing issues. if yes where ? front ? back ? I plan on lowering on Coils, prob megan...
Will I have to roll fenders for the +25 in the rear? thanks
#1858
Lexus Test Driver
iTrader: (13)
is there any way i can fit a 19x8.5 +22 with a 235/35/19 tire without rubbing like crazy?
Im on bcr coils so i can adjust ride height but i dont wanna look like 4x4 and i really dont want the tires to stick out like crazy.
can i roll the front fenders at all? will that give me any clearance? are there any 235/35/19 tires that run a little on the small side compared to the general UHPs?
what if i mill 3mm off the wheels?
Im on bcr coils so i can adjust ride height but i dont wanna look like 4x4 and i really dont want the tires to stick out like crazy.
can i roll the front fenders at all? will that give me any clearance? are there any 235/35/19 tires that run a little on the small side compared to the general UHPs?
what if i mill 3mm off the wheels?
#1860
Lexus Fanatic
iTrader: (56)
is there any way i can fit a 19x8.5 +22 with a 235/35/19 tire without rubbing like crazy?
Im on bcr coils so i can adjust ride height but i dont wanna look like 4x4 and i really dont want the tires to stick out like crazy.
can i roll the front fenders at all? will that give me any clearance? are there any 235/35/19 tires that run a little on the small side compared to the general UHPs?
what if i mill 3mm off the wheels?
Im on bcr coils so i can adjust ride height but i dont wanna look like 4x4 and i really dont want the tires to stick out like crazy.
can i roll the front fenders at all? will that give me any clearance? are there any 235/35/19 tires that run a little on the small side compared to the general UHPs?
what if i mill 3mm off the wheels?
you can roll the fenders, but you will rub at the tab where the fender meets the bumper.
milling the inside mounting face to effectively increase offset (by pushing the inside mounting face farther away from the centerline of the wheel) weakens its structural integrity, and if you have closed-end lugnuts you might end up having too many threads on the studs to mount before the lugnuts can secure the wheel.