When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
you will ned to shave or roll the rear and your front tire is to big for no fender mods, youll have to mold your fender liner to have it not rub when turning and what not
your should not have to mod your rear at all but i would run a 245/40 and the front run a 215/40 or a 225/40 and your should be fine. plus are you lowered at all?
then youll probably have to do the fender bumper tab mod. where the fender meets the bumper there is a tab, remove the bolt. take hammer and beat tab upward, then drill hole further back on the tab. and zip tie together
i have a 2008 is250 awd. Im looking to get the mrr gt1 hyper silvers
would this fit?
19x8.5 all around? What off set should i go with?
i want to use 235/35/19 nexen n3000
I will be lowered on eibach pro kit eventually.
Will I rub if I run a 19x9 +28 and a 19x10 +35 on my 250 RWD? I was planning on dropping on BC Racing Coilovers. I was hoping not to modify any of my fenders if possible.
i have a 2008 is250 awd. Im looking to get the mrr gt1 hyper silvers
would this fit?
19x8.5 all around? What off set should i go with?
i want to use 235/35/19 nexen n3000
I will be lowered on eibach pro kit eventually.
you should be good with 8.5+25 all around and run 225/35
Originally Posted by 1LowGS
Will I rub if I run a 19x9 +28 and a 19x10 +35 on my 250 RWD? I was planning on dropping on BC Racing Coilovers. I was hoping not to modify any of my fenders if possible.
youll be good depending on how low you are. the lower the more camber. but the lower you go the front will start to rub. so you can stay at the top of your tires and not rub.