Will those wheels fit? START HERE.
#663
Pole Position
iTrader: (13)
I wonder the same too, I am going to test my rear wheel to fit the front, right now my rear is 20x9.5 +35offset and running 255-30-20, I will test to see if there is any rubbing to the fender? I know it hit the plastic inner fender, which I already push it back, all I hope it'll not rub the fender. And are there anyone running 20x10.5 with +40 or 45 offset without any issue? because I still have my 285-30 tires left to put on the new wheels
#673
Lexus Champion
iTrader: (7)
So I take it from comments that a 9.5 is just fine, as long as the offsets and tire choice are correct.
Right now, I'm running a 19x8.5 +23 with a 225 tire. (I'm not rubbing whatsoever after extensive front fender mods). So my question is what tire/offset combo in a 9.5 would best emulate what I'm running in terms of equal flushness & similar tire stretch?
I'm guessing 19x9.5 +35 or +36 with a 235 tire? That kinda equates to what I'm running above? This would give the same flushness and same sorta tire stretch correct?
Right now, I'm running a 19x8.5 +23 with a 225 tire. (I'm not rubbing whatsoever after extensive front fender mods). So my question is what tire/offset combo in a 9.5 would best emulate what I'm running in terms of equal flushness & similar tire stretch?
I'm guessing 19x9.5 +35 or +36 with a 235 tire? That kinda equates to what I'm running above? This would give the same flushness and same sorta tire stretch correct?
#674
Lexus Champion
iTrader: (1)
So I take it from comments that a 9.5 is just fine, as long as the offsets and tire choice are correct.
Right now, I'm running a 19x8.5 +23 with a 225 tire. (I'm not rubbing whatsoever after extensive front fender mods). So my question is what tire/offset combo in a 9.5 would best emulate what I'm running in terms of equal flushness & similar tire stretch?
I'm guessing 19x9.5 +35 or +36 with a 235 tire? That kinda equates to what I'm running above? This would give the same flushness and same sorta tire stretch correct?
Right now, I'm running a 19x8.5 +23 with a 225 tire. (I'm not rubbing whatsoever after extensive front fender mods). So my question is what tire/offset combo in a 9.5 would best emulate what I'm running in terms of equal flushness & similar tire stretch?
I'm guessing 19x9.5 +35 or +36 with a 235 tire? That kinda equates to what I'm running above? This would give the same flushness and same sorta tire stretch correct?
I think a 19X9.5+35 with a 235 will be fine. Maybe some minor rubbing but nothing to worry about. My set of wheels is gonna be 19x9.5+20 up front. Just wait
#675
Lexus Champion
iTrader: (7)
- this should match my same flusheness... and a 235 tire on a 9.5 should match a similar stretch that I'm running... what part do you think would rub? if your talking about the fender liner, I aready heated the entire wheel well so far away from the wheel its crazy, its like I don't even have a fender liner (hence I'm not rubbing) - but if you think i would still rub, what part would rub?