steezy

good luck fitting that. the rears are sick.

integlspwr

iTrader: (2)

rears are super on point. I think i can fit the front with a 215.35.18.

now just need to find a pair.

steezy

js4kix should sets of tires you could use. haha. FH all the way.

integlspwr

iTrader: (2)

ya they guarantee have em but i need looking for cheaper at the moment. after buying the wheel and coilovers, kinda low on funds.

lex2boost

I'm looking to get some Vossen VVSCV1 wheels for my IS250. Mods I currently have are, Megan coils dropped about 2in from factory height and no fender liners. I was wondering if a set of 245/30/20x9 w +38 in the front and 285/25/20x10.5 w +42 Rear offset would work. What issues would I run into here? Should the back tire be a lil narrower? All input is greatly appreciated.

PAVGR

iTrader: (2)

Hello.I have a Lexus is250RWD and i m planing to lower it on tein comfort sport.I also have 19is wheels and i m waiting to install everything together.The specs of the wheels are 8.5 front and 9.5 rear 38 offset all around.I m thinking 225-35-19,245-35-19.I saw on the tire calculator that these are the right sizes.The question is will i rub with these offsets and were ,considering that i will lower my car as much as i can?

Feb30th

I'm about to take the plunge for the Vossen VVS-CV1 with 20x9 +38 at the front and 20x10.5 +42 at the rear. I'm planning to use 245/30/20 and 285/30/20 as my tire sizes. Just want to double make sure there will be no rubbing with this setup, with stock height and no modification to fenders etc.

Will I get a flush look with this setup?

If in the future I decide to drop the height by an inch or something will modifications be needed for the fenders?

What brand of ultra or max high performance summer tires do you recommend? So far I'm only looking at Yokohama Advan Sport.

Thanks for the help!

imports4me

iTrader: (1)

Hey Guys,

I know there has been alot of wheel and tire fitment questions and i have been trying to do as much research and reading everyones comments and alot of them i have factored. Im about to place an order for these rims and tires but just want to make sure on the fitment and tire sizes before going ahead. please help me and give me your thoughts.

This is my dilemma.
2010 IS250 AWD (BC racing coils are being shipped right now)

19" rims
8.5 front +35
9.5 rear +40

now as for the tires, is 235/35/19 f and 265/30/19 r going to be ok for this setup. ill be lowering it enough that i wont make fender mods and enough to get around. for some reason some of the sites i looked at the tires only offer 275 rears and not 265. if i end up with 275 on the rears will this be bad. or should i stick with 265? (if i can find them)

i originally was going to get falken 452 but i read some reviews that these are crap. im willing to pay a few dollars more if needed but im just looking for best bang for the buck. is the NITTO NT555 any good? or is there another set of tires that is a few dollars more that you recommend?


sorry guys, im just so new to this car. i just want to be sure before ordering and dont end up with buyers remorse.

thanks in advance

Frosty250

iTrader: (18)

Those should fit. I have falken 452s and I don't have a problem with them.

imports4me

iTrader: (1)

thanks for your feedback!

what if it was 275 in the rears?

kingkai23

iTrader: (3)

fronts -20x8.5 +25 with 225 30 's dropped on h and r's on my is350 am i going to rub ?need to know so ill tell the shop to roll my fenders or not. my rears are 20x10 +40 with 255 30's i think i should be ok there

toizkixz

yup let us noe if u need tires i'm there most of the time....stephen is the tire guy there..

pandy_88

iTrader: (2)

will will that fit the is250, fender rolled and cut.

is x11 +50 like having x10 +22?

rule1223

iTrader: (15)

no, 20x11 +50=20x10 +41, you don't need any fender work.

Mv350

iTrader: (23)

but youll need a streched tired to fit