Will those wheels fit? START HERE.
#1681
Lexus Champion
iTrader: (20)
hey everyone. I want to purchase a set of work emotion crkais. I m going for an 18 by8.5 in the front and 9.5 in the back. I want to run +25 and +20 offsets. Will there be any rubbing issues of the fenders or quarterpanels on stock height. tires will be stock 225/40 and 255/40
#1682
Lexus Test Driver
Hello, I don't know much about tires, but I figured I'd ask instead of just buy something.
Question, I wanna get the 5 Axis X5:F Rims on my stock 06 IS350
I want 19's, but what width and offset should I go with?
Question, I wanna get the 5 Axis X5:F Rims on my stock 06 IS350
I want 19's, but what width and offset should I go with?
#1684
Lexus Test Driver
iTrader: (23)
hey everyone. I want to purchase a set of work emotion crkais. I m going for an 18 by8.5 in the front and 9.5 in the back. I want to run +25 and +20 offsets. Will there be any rubbing issues of the fenders or quarterpanels on stock height. tires will be stock 225/40 and 255/40
I have a question about wheels and tire size. I'm not a expert on wheels/tires/offset. I'm considering purchasing these wheel an would like to kno what is the largest profile tire I can put on them without rubbing and will it fill all of the gap without lowering the car?? I also would like the larger profile for ride quality and help prevent wheel damage from pothole strikes. I have a rwd 08 is250. 55mm profile work? Would this look good aswell?
mod bumper tab, roll fenders in the front. roll with a slight pull rear.
#1685
#1687
What kind of "front" fender liner modification do these two front sets require?
Front Set #1: 19X8 +29 with 225/35/19 Hankook V12 EVO and 1.5 inches drop
Front Set #2: 19X8 +37 with 225/40/19 Hankook V12 EVO and 1.5 inches drop
1) Requires No modification at all
2) Heat Gun in some area
3) Dremel/cutting the front bumper tab
4) Both 2 and 3
I am torn between these two.
Set#1 looks better
Set#2 drives better
Thinking all day and night
Thanks for your advise.
Front Set #1: 19X8 +29 with 225/35/19 Hankook V12 EVO and 1.5 inches drop
Front Set #2: 19X8 +37 with 225/40/19 Hankook V12 EVO and 1.5 inches drop
1) Requires No modification at all
2) Heat Gun in some area
3) Dremel/cutting the front bumper tab
4) Both 2 and 3
I am torn between these two.
Set#1 looks better
Set#2 drives better
Thinking all day and night
Thanks for your advise.
#1688
Lexus Test Driver
iTrader: (23)
What kind of "front" fender liner modification do these two front sets require?
Front Set #1: 19X8 +29 with 225/35/19 Hankook V12 EVO and 1.5 inches drop
Front Set #2: 19X8 +37 with 225/40/19 Hankook V12 EVO and 1.5 inches drop
1) Requires No modification at all
2) Heat Gun in some area
3) Dremel/cutting the front bumper tab
4) Both 2 and 3
I am torn between these two.
Set#1 looks better
Set#2 drives better
Thinking all day and night
Thanks for your advise.
Front Set #1: 19X8 +29 with 225/35/19 Hankook V12 EVO and 1.5 inches drop
Front Set #2: 19X8 +37 with 225/40/19 Hankook V12 EVO and 1.5 inches drop
1) Requires No modification at all
2) Heat Gun in some area
3) Dremel/cutting the front bumper tab
4) Both 2 and 3
I am torn between these two.
Set#1 looks better
Set#2 drives better
Thinking all day and night
Thanks for your advise.
#1689
dang so i guess i wont be going with the tens
well ****** do you think 19x8.5 +32 with 5mm spacer and a 19x9.5 + plus 35 would look good on eibach pro kits?
and would a 15mm rear spacer fit on this setup with only grinding the rear fender?
well ****** do you think 19x8.5 +32 with 5mm spacer and a 19x9.5 + plus 35 would look good on eibach pro kits?
and would a 15mm rear spacer fit on this setup with only grinding the rear fender?
#1692
Pole Position
iTrader: (7)
Join Date: Nov 2008
Location: CA
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
HELP ASAP!!! to all those wheel sizing connoisseur (Mv350) out here im shopping for wheels as we speak...
i drive an 08 ISX50 on AIR
will these fit??
Wheels:
Fronts: 19x9.5 +11
Rears: 19x11 +18
Tires:
235/35/19
275/30/19
i kno the offsets are really low... do i need any fender pulling? or camber kits??
anything will help... thanks!
PM me or ill just check this thread again.. if i can find it
i drive an 08 ISX50 on AIR
will these fit??
Wheels:
Fronts: 19x9.5 +11
Rears: 19x11 +18
Tires:
235/35/19
275/30/19
i kno the offsets are really low... do i need any fender pulling? or camber kits??
anything will help... thanks!
PM me or ill just check this thread again.. if i can find it
#1693
Lexus Test Driver
iTrader: (23)
HELP ASAP!!! to all those wheel sizing connoisseur (Mv350) out here im shopping for wheels as we speak...
i drive an 08 ISX50 on AIR
will these fit??
Wheels:
Fronts: 19x9.5 +11
Rears: 19x11 +18
Tires:
235/35/19
275/30/19
i kno the offsets are really low... do i need any fender pulling? or camber kits??
anything will help... thanks!
PM me or ill just check this thread again.. if i can find it
i drive an 08 ISX50 on AIR
will these fit??
Wheels:
Fronts: 19x9.5 +11
Rears: 19x11 +18
Tires:
235/35/19
275/30/19
i kno the offsets are really low... do i need any fender pulling? or camber kits??
anything will help... thanks!
PM me or ill just check this thread again.. if i can find it
#1694
Pole Position
iTrader: (7)
Join Date: Nov 2008
Location: CA
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
yes that setup will work. you can go 20mm spacer in the back and youd be fine.
not sure about a 10.5 up front.
yes, with 215/35 up front, and 235/35 rear, and just roll and drop the car.
yes thatll work, but run 225/35/19 up front. pull front and rear. remove bumper tab. and get camber kit for rear, and spc adjustable ball joints for the is300 and use those up front for camber.
not sure about a 10.5 up front.
yes, with 215/35 up front, and 235/35 rear, and just roll and drop the car.
yes thatll work, but run 225/35/19 up front. pull front and rear. remove bumper tab. and get camber kit for rear, and spc adjustable ball joints for the is300 and use those up front for camber.