integlspwr

iTrader: (2)

I was looking at picking up some wheels and wanted to get 19x10.5 +22 All Around.

I like non staggered fitment because of the face design is concave all around vs just being concave in the rear.

How hard / easy is it to fit this fitment on a IS350?

Im a n00b when it comes to IS350 fitment so please bare with me.

Thanks!

aliu603

iTrader: (18)

youre going to need to do some fender work for sure...that is if you're lowered....are you?

iialcii

iTrader: (3)

iunno how your going to turn. def fender mods

IS-SV

Will require fender mods, fender flares and serious lift kit.

datplayaz

iTrader: (9)

You will be able to fit the rear with some fender mods, like shaving or rolling... But 10.5 +22 up front is too much unless you have fender flares, or you pull your fender another 1.5-2".

integlspwr

iTrader: (2)

when you guys say serious fender mods, do you mean roll to where its almost flare but do not chip the stock paint.. also camber will also help with aiding the fitment.

i plan on running on coilovers..

Is there an aggressive wheel thread in the 2IS forums?

Signal_jp

iTrader: (1)

yes, there is an aggressive wheel thread.

depending on the wheel company you choose, they offer two differect faces, standard or concaved. i know for a fact that the volk te's offer 2 faces.

i personally thinkg 10.5 +22 is super flush but for the front, thats too much. you would need some serious fender work on the front. not a fender roll but more likely a pull.

dangy

iTrader: (1)

The rears will be easy but fronts seem a lil hard..

Wierdazndu

iTrader: (11)

same as all the other response. I dont know how the fronts would work. i think that 10.5 +22 in the front is an insane fitment but im not saying it will never work. WHo knows man. Ask samson.

aliu603

iTrader: (18)

be the first.......

xuningshen

iTrader: (1)

not trying to thread jack but i'm looking into some rims too, you guys say 19x10.5 +22 is do-able in the rear w/ some shaving but how about 19x9.5 +22 front? i'm pretty sure its to aggressive, it would need to be +30's to 40 but just want to verify from someone who knows the offsets on our cars.

tmf2004

iTrader: (15)

10.5 in the front...

aliu603

iTrader: (18)

im going to be getting 19x9.5 +29 up the front. and that'll work for sure with some fender work. you should be good with high 20s and low 30s up front with 19x9.5 for sure

iRock

iTrader: (12)

10.5 in the front whoa... i definately wanna see some pics if u do it

ek9vboi

iTrader: (3)

Most I've seen is 9.5 so far. It works... but I'll be honest. IT WON'T WORK.

Since you admit to being a noobie, I'll forgive. Go with a 9 or 9.5"