IS - 2nd Gen (2006-2013) Discussion about the 2006+ model IS models

Rolled my fenders (pics, little DIY)

Thread Tools
 
Search this Thread
 
Old 06-17-09, 06:43 PM
  #1  
juice14
Lexus Champion
Thread Starter
 
juice14's Avatar
 
Join Date: Jun 2008
Location: Ga
Posts: 2,297
Likes: 0
Received 2 Likes on 2 Posts
Default Rolled my fenders (pics, little DIY)

I finally found a hot day to roll my fenders. now i can finally drive it hard whenever i want to. and also put people in the back seats.
you can use the "bat procedure" but since ive had a fender roller for a couple of years, i didnt have to use a bat to roll my fenders.

steps:
1) jack the car up take the wheel off
2) set up the fender roller on the car
3) adjust fender roller to where it puts some pressure on the fender lip
4) before moving the fender roller from side to side, heat up the paint with the heat gun
5) roll them and drink beer
6) go drive with 5 people in the car and see if it rubs.

TOOLS NEEDED:

Fender roller


heat gun


Imported Italian Beer



more pics











Old 06-17-09, 06:44 PM
  #2  
MiamiIS350
Driver
 
MiamiIS350's Avatar
 
Join Date: Feb 2008
Location: FL
Posts: 129
Likes: 0
Received 0 Likes on 0 Posts
Default

Any paint cracking?
Old 06-17-09, 06:54 PM
  #3  
juice14
Lexus Champion
Thread Starter
 
juice14's Avatar
 
Join Date: Jun 2008
Location: Ga
Posts: 2,297
Likes: 0
Received 2 Likes on 2 Posts
Default

yes the paint cracked only on the inside as litte bit. but i covered it up with some tuch up paint so it wont peel off. i did this on my previous car and it cracked about the same. howver it never peeled off in about 3 years.

Last edited by juice14; 06-17-09 at 10:56 PM.
Old 06-17-09, 08:29 PM
  #4  
DeviousOne
Lead Lap
iTrader: (1)
 
DeviousOne's Avatar
 
Join Date: Jan 2007
Location: CA
Posts: 445
Likes: 0
Received 0 Likes on 0 Posts
Default

Nice, I need to do this...
Old 06-17-09, 08:51 PM
  #5  
Initial G
Lexus Champion
iTrader: (38)
 
Initial G's Avatar
 
Join Date: Jul 2008
Location: Ca
Posts: 3,323
Received 0 Likes on 0 Posts
Default

Looks good. How long did it take? Love the peroni!
Old 06-17-09, 09:20 PM
  #6  
dangy
Lexus Champion
iTrader: (1)
 
dangy's Avatar
 
Join Date: Aug 2008
Location: SoFlo
Posts: 1,607
Received 1 Like on 1 Post
Default

Niceee!
Old 06-17-09, 09:43 PM
  #7  
NvrBneStck
Driver School Candidate
 
NvrBneStck's Avatar
 
Join Date: Jun 2009
Location: Or
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default

Wow .. Nice Volks ! I did this on my IS and boy was I nervous.. Good job!
Old 06-17-09, 09:50 PM
  #8  
nmpeter
Pole Position
iTrader: (15)
 
nmpeter's Avatar
 
Join Date: Mar 2009
Location: Florida
Posts: 2,443
Received 0 Likes on 0 Posts
Default

Nice. Any before/after pictures and pictures of cracking?
Old 06-17-09, 10:47 PM
  #9  
juice14
Lexus Champion
Thread Starter
 
juice14's Avatar
 
Join Date: Jun 2008
Location: Ga
Posts: 2,297
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by Initial G
Looks good. How long did it take? Love the peroni!
took me a while because i do things slow just to make sure i dont make a mess. about an hour each side im guessing. it can be done in less if you have done it before. id say a total of 3 hours conunting jacking the car, taking off and putting on the wheels, heating the paint, the beer, etc

Last edited by juice14; 06-17-09 at 10:58 PM.
Old 06-17-09, 10:56 PM
  #10  
juice14
Lexus Champion
Thread Starter
 
juice14's Avatar
 
Join Date: Jun 2008
Location: Ga
Posts: 2,297
Likes: 0
Received 2 Likes on 2 Posts
Default

the fenders on the is are almost reinforced. they are strong and i think its VERY har to roll them without cracking the paint on the inside of the fender.


Originally Posted by nmpeter
Nice. Any before/after pictures and pictures of cracking?
here are some pics:

BEFORE:



AFTER

Old 06-18-09, 12:11 PM
  #11  
htownis350
Driver
 
htownis350's Avatar
 
Join Date: Dec 2008
Location: tx
Posts: 107
Likes: 0
Received 0 Likes on 0 Posts
Default

very nice, never had peroni beer i have to try both!
ha good write up
Old 06-18-09, 12:47 PM
  #12  
Robs IS250
Lexus Fanatic
iTrader: (4)
 
Robs IS250's Avatar
 
Join Date: Oct 2007
Location: Miami
Posts: 6,058
Likes: 0
Received 0 Likes on 0 Posts
Default

good write up!
Old 06-18-09, 01:27 PM
  #13  
vuiskool
Instructor
 
vuiskool's Avatar
 
Join Date: Mar 2007
Location: S. FL
Posts: 842
Received 6 Likes on 2 Posts
Default

wow, i never knew how u rolled fenders till this thread. THANKS! haha
Old 06-18-09, 02:00 PM
  #14  
iSuxeL
Lexus Fanatic
iTrader: (21)
 
iSuxeL's Avatar
 
Join Date: Jan 2007
Location: FL
Posts: 9,302
Likes: 0
Received 1 Like on 1 Post
Default

Should've cut, but great write up nonetheless.
Old 06-18-09, 04:13 PM
  #15  
juice14
Lexus Champion
Thread Starter
 
juice14's Avatar
 
Join Date: Jun 2008
Location: Ga
Posts: 2,297
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by htownis350
very nice, never had peroni beer i have to try both!
ha good write up
you should try it


Quick Reply: Rolled my fenders (pics, little DIY)



All times are GMT -7. The time now is 01:55 PM.