When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
If someone could help me out, I've tried to find some pictures of installed height sensors for the E level kit on a 2IS but haven't had any luck.. I was planning to install the sensor on the frame so the rod would ride on the LCA but not sure if that'll work..
^^ it doesnt matter where you mount your sensors. Just as long as it doesnt over extend. Follow the measurements in the instruction and you'll be fine.
^^ it doesnt matter where you mount your sensors. Just as long as it doesnt over extend. Follow the measurements in the instruction and you'll be fine.
great thread but there is a lack of pictures on how the rear bags are positioned for those running UAS. i'm planning to do a UAS-over-coilover suspension soon on a 2IS. i will do a similar write up as i did my UCF20 LS400.
great thread but there is a lack of pictures on how the rear bags are positioned for those running UAS. i'm planning to do a UAS-over-coilover suspension soon on a 2IS. i will do a similar write up as i did my UCF20 LS400.
Depends what coilovers you use. Most coilovers like bc racing, megans have to be cut and sectioned. Univeral air will do it for a small fee. Heres my rears. UAS over bc racing.