18" aftermarket wheels on 2IS?
08-07-14, 08:06 AM
#391
Driver
iTrader: (4)
Join Date: May 2012
Location: Ohio
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Yea were about to put a staggered setup on hers. I am lookin at same tire size. What widths are your wheels?
And yea I know all about the rubbing in the back. I do that in my neon here and there lol.
And yea I know all about the rubbing in the back. I do that in my neon here and there lol.
08-07-14, 11:00 AM
#393
Driver
iTrader: (4)
Join Date: May 2012
Location: Ohio
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
We are most likely keeping it now. We just bought me a nice daily and we didnt know if we could afford both but we got it figured out now. So she wants new wheels and do a few new things to it so tryin to sell some stuff to make the new stuff happen for her. lol.
08-19-14, 03:39 AM
#397
Driver School Candidate
Join Date: Aug 2014
Location: Herts
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Just read the whole thread and I'm still at a loss.
Got some 18x9 and 18x10 et38 rims to fit to my 06' IS250.
225/40/18 and 245/40/18 rubber be OK?
Will they rub and or need spacing?
Help!
Got some 18x9 and 18x10 et38 rims to fit to my 06' IS250.
225/40/18 and 245/40/18 rubber be OK?
Will they rub and or need spacing?
Help!
08-19-14, 03:53 AM
#398
You'll be fine your offset is only 2mm off from OEM and even though your wheels are wider you are still good to sit flush though you would need fender roll and pull and 15mm spacers with those specs though your wheels will still be sunken in when you lower it
08-19-14, 04:04 AM
#399
Driver School Candidate
Join Date: Aug 2014
Location: Herts
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Least I know I can get them fitted no drama at the garage and then worry about spacing and pulling to get the fit right later.
I can't wait to get them on - marmite but I love em - Rays Victrix Brainers.
