AGGRESSIVE ISX50 wheel thread
#2042
Rookie
iTrader: (2)
Hi guys, I have a GS350 maybe you guys can help me, I am on f sport springs but am getting coils soon, the wheels I have are Lowenhart BR5
20x9 +32 front and 20x11 +25 rear, I've shaved my fenders in the rear till the welding points , I just want to know how else I can accommodate these wheels to fit on my car without any issues.. Any info will help
Thanks in advance
20x9 +32 front and 20x11 +25 rear, I've shaved my fenders in the rear till the welding points , I just want to know how else I can accommodate these wheels to fit on my car without any issues.. Any info will help
Thanks in advance
#2048
Lexus Test Driver
iTrader: (2)
https://www.clublexus.com/forums/whe...s-sensors.html
#2051
guys, what must be done to fit 19x9 +23 in the front? i got 225/35 tires already.
i already tried 18x8.5 +20 -> 3mm less poke then the 19x9 +23. but this was not driveable. standard problem the bumper tab was not the worst. at every narrow turn, the tire touched the fender.
my work vsxx wheels wont fit the IS 350 calipers i got installed.. it is the A disc for standard brake clearance. i thought if the OEM 17" wheels will clear the caliper, then the much wider 19" work wheels will also clear the brakes.
so now i need 15mm spacers to make them fit, which brings me to offset 23.
how much space will i gain from more camber in the front? like 2 degrees?
i already tried 18x8.5 +20 -> 3mm less poke then the 19x9 +23. but this was not driveable. standard problem the bumper tab was not the worst. at every narrow turn, the tire touched the fender.
my work vsxx wheels wont fit the IS 350 calipers i got installed.. it is the A disc for standard brake clearance. i thought if the OEM 17" wheels will clear the caliper, then the much wider 19" work wheels will also clear the brakes.
so now i need 15mm spacers to make them fit, which brings me to offset 23.
how much space will i gain from more camber in the front? like 2 degrees?
Last edited by DocFreud; 03-28-15 at 08:22 AM.
#2053
Rookie
iTrader: (2)
Join Date: Dec 2010
Location: BC, Canada
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
guys, what must be done to fit 19x9 +23 in the front? i got 225/35 tires already.
i already tried 18x8.5 +20 -> 3mm less poke then the 19x9 +23. but this was not driveable. standard problem the bumper tab was not the worst. at every narrow turn, the tire touched the fender.
my work vsxx wheels wont fit the IS 350 calipers i got installed.. it is the A disc for standard brake clearance. i thought if the OEM 17" wheels will clear the caliper, then the much wider 19" work wheels will also clear the brakes.
so now i need 15mm spacers to make them fit, which brings me to offset 23.
how much space will i gain from more camber in the front? like 2 degrees?
i already tried 18x8.5 +20 -> 3mm less poke then the 19x9 +23. but this was not driveable. standard problem the bumper tab was not the worst. at every narrow turn, the tire touched the fender.
my work vsxx wheels wont fit the IS 350 calipers i got installed.. it is the A disc for standard brake clearance. i thought if the OEM 17" wheels will clear the caliper, then the much wider 19" work wheels will also clear the brakes.
so now i need 15mm spacers to make them fit, which brings me to offset 23.
how much space will i gain from more camber in the front? like 2 degrees?
Oh my bumper tab is relocated as well
#2054
appreciate your answer.
my front fenders can't be rolled i think. they look totally flat. not like the back fenders.
i looked for 215/35 tires. but none have the required load index. the car is to heavy for those tires in the front.
I think i have to adjust the height, make it higher until I get a camber kit.
if anyone could answer my last question regarding space from camber, I would be more than happy. thanks
my front fenders can't be rolled i think. they look totally flat. not like the back fenders.
i looked for 215/35 tires. but none have the required load index. the car is to heavy for those tires in the front.
I think i have to adjust the height, make it higher until I get a camber kit.
if anyone could answer my last question regarding space from camber, I would be more than happy. thanks