AGGRESSIVE ISX50 wheel thread
#2056
Driver School Candidate
Join Date: Dec 2014
Location: NC
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Too Much Stretch?
So my new Work Emotion CR2P should be in tmrw, went with 19x8.5 35mm front and 19x9.5 35mm rear. I was thinking about getting 215/35/19s all around. I've read that 215s aren't rated (or are hard to find) for the weight. Would the stretch be an issue? Looking to add negative camber in the rear. Figs goodies enroute. Oh and I'm at about a 3" dropp. Spacers might need to be purchased to get the setup I want.
#2060
Driver School Candidate
Join Date: Apr 2015
Location: Finland
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
I'm thinking to buy some wheels for my is220d and came up with specs like this:
F: 9,5x19", ET 34, 225/40/19
R: 11x19", ET 35, 255/35/19
So any bodywork (fender rolling etc.) needed? Or anything else i need to know?
Car will be also fitted with bc racing coilovers.
F: 9,5x19", ET 34, 225/40/19
R: 11x19", ET 35, 255/35/19
So any bodywork (fender rolling etc.) needed? Or anything else i need to know?
Car will be also fitted with bc racing coilovers.
#2061
Pole Position
iTrader: (3)
so am i the only stupid person on here trying to run a 275/30/20 on a 20x11 mid offset wheel and still get it tuck into the stock fenders? I'm about to take my 255/30's of and run the 275's. the rear is already pulled megan camber arms maxed out. im actually trying to remove some camber in the process any advice?
#2068
Driver School Candidate
Join Date: Feb 2015
Location: washington
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
looking at picking up a set of 19x9.5 +35 wheels for my 250awd.. anyone have any issues running that wide of a wheel up front? im lowered on h&r springs..