exhaust tips to replace oem??
#1
Pole Position
Thread Starter
Join Date: Oct 2006
Location: texas
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
exhaust tips to replace oem??
I just wanted to know where I could get some exhaust tips to replace the oem tips and what would you guys recommend.I think these are fairly easy to install right?
#3
Pole Position
iTrader: (1)
Join Date: Aug 2006
Location: MA
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
I picked up a pair of these, just havent had time to install... Im pretty sure I got the right size:
magnaflow 4" diameter, 4.5" length, 2.25 inlet. You can get them in 3.5" diameter as well...
magnaflow 4" diameter, 4.5" length, 2.25 inlet. You can get them in 3.5" diameter as well...
#6
Lexus Test Driver
Join Date: Jul 2004
Location: Kansas
Posts: 827
Likes: 0
Received 0 Likes
on
0 Posts
there are plenty of after-market tips available, such as Borla, Magnaflow. The problem lies in the car's exhaust pipe itself, which has protrusions on the inner pipe, after you remove the outer finish. These protrusions will hinder the installation of the new tip. Installation requires cutting the old pipe off and soldering the new tip to the muffler itself.
#7
Pole Position
iTrader: (1)
Join Date: Aug 2006
Location: MA
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
there are plenty of after-market tips available, such as Borla, Magnaflow. The problem lies in the car's exhaust pipe itself, which has protrusions on the inner pipe, after you remove the outer finish. These protrusions will hinder the installation of the new tip. Installation requires cutting the old pipe off and soldering the new tip to the muffler itself.
I knew the tips needed to be welded; but I was hoping for a straight 2.25 outlet that could be cut down to about an inch. I ended up cutting the outlet on the tapered section and used 3 stainless rivits--instead of welding--to secure the tips in place. It's solid. I think it came out quite well and it only cost me $54 in the end
Its dirty, but here it is:
More pics when the 19" iForged Imola's are on, and eibach suspension installed
Trending Topics
#14
Where in FL are you?
Prospect Muffler, in Okland Park, does excellent work at a very reasonable price.
http://www.prospectmuffler.com/index.htm
Prospect Muffler, in Okland Park, does excellent work at a very reasonable price.
http://www.prospectmuffler.com/index.htm