Dj_AmtraX

iTrader: (2)

Tools:
screw driver (flat & philips)
Panel poper






Then pull at all corners.

javyLSU

iTrader: (21)

Awesome post! I know a lot of us have been wanting a guide on how to remove the door panel. Great pics, too!

Javier

shrka

you are brave...thanks for the diy

G35TOIS350

dont see any pics

carlos

iTrader: (1)

i've posted pics before.

carlos

iTrader: (1)

https://www.clublexus.com/forums/sho...d.php?t=238058

carlos

iTrader: (1)

i also edited that post up there to reflect my new findings

Dj_AmtraX

iTrader: (2)

Don't forget to disconnect the two cables.

istundra

iTrader: (2)

wth. wut areyou installing? Also, there is a trick to re-install the door panel.

let me know if you don't know

A.C Milan

thanx for the pics .. hope i dont get forced by future rattles to to do this.

kattanh3

useful post, thanks Dj... I needed this DYI guide to install sound insulator sheets

nabisco

Great info. Thanks!

ULTiMaX99

iTrader: (5)

i'm sure this will be very useful! thanks for the pics! just be very careful with the switches... i've been told they're fragile and are pretty expensive to replace.

Dj_AmtraX

iTrader: (2)

The switches can be removed from the plates. That means for those who wants aluminum, you can buy it at the dealer without the switches.

ahohnstein

Dj- thanks for the pics. I have a question. I have some replacement sills that I need to install (my tinter nicked them all up so I had to get replacements). I've gotten to the point of trying to pull the door panel off. I'm a bit scared to yank it because it feels like the fiberboard panel is going to break before the fasteners give. When you removed it did you give it a good pull/yank or did you slowly pull until the fastener popped loose? I'm just afraid to ruin the door panel.