V1 radar mount
11-08-06, 02:01 PM
#1
Pole Position
Thread Starter
Join Date: Sep 2006
Location: Oklahoma
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
V1 radar mount
Just installed my new V1 radar mount. Great for hard wired apps. All metal and fit is clean. I am sure you have seen this one before, but I'll show you any way.
11-08-06, 05:56 PM
#5
Lexus Test Driver
i hardwired mine and put it on the driver's side. bottom left corner of the windshield. its perfect for me, still gets signals, and easy to take off when i'm parked at school or something. easy to get to the buttons, passenger won't mess with it, and it's as 'stealthy' looking as i could get it.
11-08-06, 06:02 PM
#6
Pole Position
Thread Starter
Join Date: Sep 2006
Location: Oklahoma
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
11-08-06, 07:24 PM
#9
Pole Position
Thread Starter
Join Date: Sep 2006
Location: Oklahoma
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
11-08-06, 07:37 PM
#10
Lexus Champion
Check out thier website: http://www.countryjoycrafts.com/Conn...arDetector.htm
11-08-06, 08:20 PM
#11
Lead Lap
iTrader: (4)
Join Date: Jan 2006
Location: Alpharetta, Ga
Posts: 586
Likes: 0
Received 0 Likes
on
0 Posts
that looks really nice, much better than the ugly suction cups that Im using.
One question though, does it make it easier to see, (in line of sight) so that when your radar detector goes off, you can see it blinking. My music is usually on and I can't always hear it. Would much rather like having a light go off in my line of sight.
What size did you get? Sorry, Im too lazy to run out and measure.
One question though, does it make it easier to see, (in line of sight) so that when your radar detector goes off, you can see it blinking. My music is usually on and I can't always hear it. Would much rather like having a light go off in my line of sight.
What size did you get? Sorry, Im too lazy to run out and measure.
11-09-06, 09:39 AM
#13
Pole Position
Thread Starter
Join Date: Sep 2006
Location: Oklahoma
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
This is not a stealth setup, so it is easy to see in and out of the car. Mainly it is used to keep the V1 in line with front/rear dtection and easy access.
11-09-06, 09:41 AM
#14
Pole Position
Thread Starter
Join Date: Sep 2006
Location: Oklahoma
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
that looks really nice, much better than the ugly suction cups that Im using.
One question though, does it make it easier to see, (in line of sight) so that when your radar detector goes off, you can see it blinking. My music is usually on and I can't always hear it. Would much rather like having a light go off in my line of sight.
What size did you get? Sorry, Im too lazy to run out and measure.
One question though, does it make it easier to see, (in line of sight) so that when your radar detector goes off, you can see it blinking. My music is usually on and I can't always hear it. Would much rather like having a light go off in my line of sight.
What size did you get? Sorry, Im too lazy to run out and measure.
11-09-06, 10:00 AM
#15
Lead Lap
Join Date: Nov 2005
Location: Florida
Posts: 576
Likes: 0
Received 0 Likes
on
0 Posts
Thanks so much for the info on where to order this! Mine is hardwired but I still have it suctioned to the window which makes it a pain for putting the sunshield in the window or putting down the sun visor. This holder right under the rearview mirror should eliminate that problem. Also, the radar detector cannot be seen from the outside when you are parked and using a sunshield unless someone is peering in the windows from the side.
Anyway, even though we have had posts ad nauseum about mounting the radar detectors, you have provided us with something new.
Mine is hardwired but I still have it suctioned to the window which makes it a pain for putting the sunshield in the window or putting down the sun visor. This holder right under the rearview mirror should eliminate that problem. Also, the radar detector cannot be seen from the outside when you are parked and using a sunshield unless someone is peering in the windows from the side.Anyway, even though we have had posts ad nauseum about mounting the radar detectors, you have provided us with something new.