Sffd103

iTrader: (16)

I had a Stinger 10 Fared capacitor.

Head74

I have a 2010 is 250 no nav. I am putting in an 1 din aftermarket radio
After I remove the 4 screws for the center console , what am I removing
To put in the new radio? Is it the cd changer at the bottom .. I also have a kit for the new 1 din radio
. What wires also am I unplugging of the old radio? And what wires do hook up to the new radio? Please help?

Head74

I have a 2010 is 250 no nav. I am putting in an 1 din aftermarket radio
After I remove the 4 screws for the center console , what am I removing
To put in the new radio? Is it the cd changer at the bottom .. I also have a kit for the new 1 din radio
. What wires also am I unplugging of the old radio? And what wires do hook up to the new radio? Please help?

rmv11

after all i bought the lc7i, it sure made a difference, but i wanted more, so i bought an aftermarket radio (pioneer 80prs). Well i have to say, i was very impressed. now i have the sound quality i was looking for. Here is my setup.

07silverIS

iTrader: (1)

oh.

my.

God!

sm1ke

iTrader: (5)

Custom ported box, 12" Infinity Kappa 120.9W, Kicker CX600.1, Audiocontrol LC2i, Belva BAK42 wiring. Wired into the factory non-ML non-NAV system. Nowhere near as elaborate as some of these other systems, but it works very well for me. The amp is mounted on the left side of the box.

skoota500

How did you get the cut out for the panel that the subwoofer sits in? Im looking to build one myself.

HAiS250

iTrader: (10)

How big are the tweeters in the front and rear? Do I need adapters to replace them?

Sffd103

iTrader: (16)

I think they're 3.5". Here's my link to what I did with my audio.
https://www.clublexus.com/forums/lex...with-pics.html

Annimossit

I've had my is250 for about a month now and love it. I hate that I don't have a usb hookup for iphone\ipods. The aux port sounds like **** and i hear ground noise whenever I press the gas pedal.

I have a nice sub\amp that i took out of my previous car I sold and plan on getting a nice stealth box as well. I install all my audio setups my self but I have a couple questions on the headunit.

I've searched but get conflicting results

Is there a ton of custom work to make a single din unit work? I hear that custom work will need to be done in order for the AC to work etc??

I was planning to get one of these single head unit install bezels

http://www.ebay.com/itm/Aftermarket-Single-Din-Factory-Radio-Replacement-Installation-Stereo-Dash-Kit-/331201376369?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3AIS250&hash=item4d1d23f071&vxp=mtr
For those of you that have installed single din units in their car what was required? Any special adapters or anything else for the climate control etc..? Or is it just like any basic single din head unit install?

Sffd103

iTrader: (16)

It requires a lot of work and does require the relocation of the A/C controls. It's not a simple setup unfortunately.

ISland350

Luvin this! Nice

Jump2man3

iTrader: (7)

Wish my new setup was done all these nice trunk builds are making me upset!

HAiS250

iTrader: (10)

front and rear tweeters should be 1 inch?

jw669

iTrader: (8)

How are you guys anchoring down the sub box? I have the same/similar set up. My box goes flying towards the rear of the car when I unleash the beast. I've temporarily added a bungee cord to span across the front, but would like something less intrusive