Yellow Foglight Overlays
#1
Pole Position
Thread Starter
Join Date: Nov 2005
Location: Canada
Posts: 260
Likes: 0
Received 0 Likes
on
0 Posts
Yellow Foglight Overlays
Well, after a bunch of bull**** from UPS I finally received my AeroTect overlays.
I followed the instructions and it took a couple of minutes per side. My only gripe, the driver's side foglight overlay has some very fine bubbles (whereas the passenger side is perfect). I tried smoothing it out with the applicator. I tried using a heat gun. The bubbles just won't come out. ARghhhh!
The parking light LEDs are PIAA blue/blue but in the eBay pictures they looked whiter - I'm not quite digging the ricey look but my knuckles don't want to take them out until the warmer weather.
Anyway, here are some pictures, don't mind the salty car - our winters blow.
I followed the instructions and it took a couple of minutes per side. My only gripe, the driver's side foglight overlay has some very fine bubbles (whereas the passenger side is perfect). I tried smoothing it out with the applicator. I tried using a heat gun. The bubbles just won't come out. ARghhhh!
The parking light LEDs are PIAA blue/blue but in the eBay pictures they looked whiter - I'm not quite digging the ricey look but my knuckles don't want to take them out until the warmer weather.
Anyway, here are some pictures, don't mind the salty car - our winters blow.
Last edited by dnszoom; 01-19-06 at 05:25 PM.
#7
Pole Position
Thread Starter
Join Date: Nov 2005
Location: Canada
Posts: 260
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by United #10
looks good!! How's the installation?
- thoroughly clean the foglight lenses
- make a mild soap solution
- turn the fogs on for a couple of minutes to heat the lenses
- douse the back of the film (the adhesive side) with the soapy solution
- because the film is pretty thick and relatively small in size, it was easy to position on the lens
- use the provided applicator and smooth out the film, draining the solution and bubbles
- apply some gentle heat from a heat gun
- wipe up and presto
That's it.
Trending Topics
#8
Lexus Diva
iTrader: (1)
Join Date: Sep 2001
Location: City of Angels
Posts: 6,951
Likes: 0
Received 0 Likes
on
0 Posts
dsnzoom, don't worry too much about the tiny bubbles. That stuff is hella hard to install properly. I think thats why it costs hundreds of dollars, it all goes to labor! lol
Anyway, your car looks pretty good to me.
Anyway, your car looks pretty good to me.
#10
Driver School Candidate
Join Date: Dec 2005
Location: California
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dnszoom
Well, after a bunch of bull**** from UPS I finally received my AeroTect overlays.
I followed the instructions and it took a couple of minutes per side. My only gripe, the driver's side foglight overlay has some very fine bubbles (whereas the passenger side is perfect). I tried smoothing it out with the applicator. I tried using a heat gun. The bubbles just won't come out. ARghhhh!
The parking light LEDs are PIAA blue/blue but in the eBay pictures they looked whiter - I'm not quite digging the ricey look but my knuckles don't want to take them out until the warmer weather.
Anyway, here are some pictures, don't mind the salty car - our winters blow.
I followed the instructions and it took a couple of minutes per side. My only gripe, the driver's side foglight overlay has some very fine bubbles (whereas the passenger side is perfect). I tried smoothing it out with the applicator. I tried using a heat gun. The bubbles just won't come out. ARghhhh!
The parking light LEDs are PIAA blue/blue but in the eBay pictures they looked whiter - I'm not quite digging the ricey look but my knuckles don't want to take them out until the warmer weather.
Anyway, here are some pictures, don't mind the salty car - our winters blow.
Looks Awesome!! Btw, where did you purchase the yellow overlays from?
#11
Lexus Diva
iTrader: (1)
Join Date: Sep 2001
Location: City of Angels
Posts: 6,951
Likes: 0
Received 0 Likes
on
0 Posts
AeroTect
(866) 388-AERO
**Please remember to mention you are from Club Lexus when contacting any of our vendors for special savings.
(866) 388-AERO
**Please remember to mention you are from Club Lexus when contacting any of our vendors for special savings.
Originally Posted by dnmukhra
Looks Awesome!! Btw, where did you purchase the yellow overlays from?
#14
Former Sponsor
AeroTect Head / foglamp overlays are designed to cover the entire light. Please be aware that the paterns from some companys are designed to be cut on clear film and may not cover the light all the way to the edges. (866) 388-AERO www.aerotect.net
#15
speshul c
iTrader: (1)
Originally Posted by AeroTect
AeroTect Head / foglamp overlays are designed to cover the entire light. Please be aware that the paterns from some companys are designed to be cut on clear film and may not cover the light all the way to the edges. (866) 388-AERO www.aerotect.net
how much is the yellow fog overlays for the is250..i only see for the is300 on your website, is it the same price? and do you take paypal
Thread
Thread Starter
Forum
Replies
Last Post
EyeKutr
GS - 3rd Gen (2006-2011)
20
09-24-07 08:14 PM