Clutch and flywheel specifics for IS200
11-27-13, 04:19 AM
#1
Driver School Candidate
Thread Starter
Join Date: Nov 2013
Location: Surrey
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Clutch and flywheel specifics for IS200
Hi all! This topic may have been covered before but im struggling to put sources together. Maybe you guys can help.
Im one of many people suffering from clutch judder on my is200. I'd like to replace the flywheel and clutch. The proper flywheel alone costs £1200 ish. Tooooo much. I thought I saw posts saying that a Toyota Supra flywheel will fit straight in with the normal lexus clutch. Can anyone confirm thats true and which Supra model Id need? Alternatively can someone point me to the right direction for a replacement system. As in what and where to get the bits?
Much appreciated! :-D
Im one of many people suffering from clutch judder on my is200. I'd like to replace the flywheel and clutch. The proper flywheel alone costs £1200 ish. Tooooo much. I thought I saw posts saying that a Toyota Supra flywheel will fit straight in with the normal lexus clutch. Can anyone confirm thats true and which Supra model Id need? Alternatively can someone point me to the right direction for a replacement system. As in what and where to get the bits?
Much appreciated! :-D
12-03-13, 09:18 AM
#2
Driver School Candidate
Thread Starter
Join Date: Nov 2013
Location: Surrey
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
I found out some info myself and should others have difficulty here's some help.
There is a company called autosessive on ebay that sell a solid flywheel by Drivetech and a company called ProlexUK who can get a solid flywheel by Jun. The price different is quite a bit (though both significantly cheaper than the Dual Mass) and at this stage I don't know much about either of them so which one is best I'm not sure. It also appears that any clutch for the IS200 will fit the flywheels.
If anyone else has heard of DriveTech and can recommend them I'll take money out my pocket. £260 for a flywheel seems a bargain!
There is a company called autosessive on ebay that sell a solid flywheel by Drivetech and a company called ProlexUK who can get a solid flywheel by Jun. The price different is quite a bit (though both significantly cheaper than the Dual Mass) and at this stage I don't know much about either of them so which one is best I'm not sure. It also appears that any clutch for the IS200 will fit the flywheels.
If anyone else has heard of DriveTech and can recommend them I'll take money out my pocket. £260 for a flywheel seems a bargain!
Thread
Thread Starter
Forum
Replies
Last Post
