17x8.5 +5, 17x10 +10 Will they fit?
11-08-10, 08:11 PM
#2
Roll/pull fenders, lots of negative camber, 205 and 215.
Exampel:
18x10 +25F or +20F
18x10 +15R
Nankang 225/35/18
Lots of negative camber.
Pokez.
Fender Work + Stretch
You'll be 5mm more aggressive in the rear than that setup.
8.5 * 25.4 / 2 - 5 = 102.95
10 * 25.4 / 2 - 25 = 102
So 8.5 +25 will be the same fitment as 10 +25 up front.
Exampel:
18x10 +25F or +20F
18x10 +15R
Nankang 225/35/18
Lots of negative camber.
Pokez.
Fender Work + Stretch
You'll be 5mm more aggressive in the rear than that setup.
8.5 * 25.4 / 2 - 5 = 102.95
10 * 25.4 / 2 - 25 = 102
So 8.5 +25 will be the same fitment as 10 +25 up front.
11-09-10, 10:35 AM
#3
Rookie
iTrader: (2)
Join Date: Apr 2010
Location: Socal
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
go for it should be fine
I was going to do 10.5 +20 in the rear
but yeah for sure camber and light pull to be done for the rear
or vice versa less camber more pull which I've seen soo many do.
I was going to do 10.5 +20 in the rear
but yeah for sure camber and light pull to be done for the rear
or vice versa less camber more pull which I've seen soo many do.
Thread
Thread Starter
Forum
Replies
Last Post
BoyOhBoy
IS - 2nd Gen (2006-2013)
42
09-28-14 02:34 AM
nismo4life
LS - 1st and 2nd Gen (1990-2000)
18
05-27-13 09:27 AM
