When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Lookin good!
Yeah some spacers would look nice, you sure 25mm isn't too much??
no im not sure but if im thinking about it correctly in my head 25mm is about 1 inch so that should by pretty flush in the rear... any input would be great
Correct, 25mm is about 1 inch. After getting my fender rolled, I was able to stick a 25mm spacer on my rear but every so often when i hit some hard dips, I'd hear some pretty nasty rubbing. However, I like the look
Originally Posted by slidingIS
no im not sure but if im thinking about it correctly in my head 25mm is about 1 inch so that should by pretty flush in the rear... any input would be great
Looks good. Doesn't look like it was lowered 3 1/2" though.
what i did before i lowered it was measured from the ground to the center, bottom side of the front fender and rear quarter panel. Where it sits now compared to where it started is 3 1/2 inches.... roughly i couldve been off a hair but thats about what it is
Correct, 25mm is about 1 inch. After getting my fender rolled, I was able to stick a 25mm spacer on my rear but every so often when i hit some hard dips, I'd hear some pretty nasty rubbing. However, I like the look
08-10-10, 11:59 AM
