My IS200 Supercharged Toy
#1
Driver School Candidate
Thread Starter
Join Date: Apr 2009
Location: UK
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
My IS200 Supercharged Toy
Hey everyone thought I would share my car with everyone else see what people think
Ok here is the progress so far, I got the car in late 06 and said that I would not touch it I liked it just the way it was I mean it was the IS200 Sport in Scarlatti red with the Lexus styling kit standard Lexus alloys premium sound system etc.
Alas this didn’t last long 1st thing I had to change the radio so after much hunting around I chose the Kenwood DDX-6029 and got to fitting as some of you might know the sport comes with its own amp and runs a digital system in the car so no left and right feed to the amp but digital signals very annoying
So after much playing about I made a bypass lead (there wasn’t one on the market when I got the car but there is now )
However I missed the bass that I had in my old car so out came the standard speakers and Infinity's went in along with an Alpine V12 and Lanzer Vibe Amp
As you can guess it didn’t stop there, I found my self addicted to putting bits on, so the fun and games started
Mirror closing module was located and fitted
Then Hands free Kit ck3200
Then LED Foot well lights Varad RGB
Ok here is the progress so far, I got the car in late 06 and said that I would not touch it I liked it just the way it was I mean it was the IS200 Sport in Scarlatti red with the Lexus styling kit standard Lexus alloys premium sound system etc.
Alas this didn’t last long 1st thing I had to change the radio so after much hunting around I chose the Kenwood DDX-6029 and got to fitting as some of you might know the sport comes with its own amp and runs a digital system in the car so no left and right feed to the amp but digital signals very annoying
So after much playing about I made a bypass lead (there wasn’t one on the market when I got the car but there is now )
However I missed the bass that I had in my old car so out came the standard speakers and Infinity's went in along with an Alpine V12 and Lanzer Vibe Amp
As you can guess it didn’t stop there, I found my self addicted to putting bits on, so the fun and games started
Mirror closing module was located and fitted
Then Hands free Kit ck3200
Then LED Foot well lights Varad RGB
#2
Driver School Candidate
Thread Starter
Join Date: Apr 2009
Location: UK
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
then I noticed that only the drivers window had 1 touch I couldn’t be doing with this time for total closure and one touch system I had a few DEI 530 box's left over from a few previous cars so these were redesigned and put to use however Lexus wiring is a pain so had to put wires into each door LONG so anyway these box's also offering a venting system via a remote or button in the car etc very good in hot weather...
This now gets us to a few more bits of fun we all hate little bollards when parking or finding some one has got right up close behind the car so I thought its time for a rear view camera but stealthy
I then needed some new tyres so whilst the wheels were off the car and it was jacked up (thought id get them refurbed at the same time I painted the callipers
So from this
To this
Spare wheel was dirty im ashamed to say lol
This now gets us to a few more bits of fun we all hate little bollards when parking or finding some one has got right up close behind the car so I thought its time for a rear view camera but stealthy
I then needed some new tyres so whilst the wheels were off the car and it was jacked up (thought id get them refurbed at the same time I painted the callipers
So from this
To this
Spare wheel was dirty im ashamed to say lol
#3
Driver School Candidate
Thread Starter
Join Date: Apr 2009
Location: UK
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Then for a little bit of time I didn’t do anything was not to well etc
JAE came and went where we fitted a supercharger to a friend’s car made me want 1 like crazy, so 2k later I had one
Standard engine bay
Full engine Bay
Car didn’t seem to have enough noise and grunt so I upgraded the filter to a K&N and gave it a full on service and it found its ***** once again
But there was something holding it back………………………
ahh yes the exhaust plain standard nothing special so a friend sold me his Blue flame
it arrived like this
Went on the car like this
So old exhaust off
New exhaust Ready NO expense spared even on the bubble wrap lol
JAE came and went where we fitted a supercharger to a friend’s car made me want 1 like crazy, so 2k later I had one
Standard engine bay
Full engine Bay
Car didn’t seem to have enough noise and grunt so I upgraded the filter to a K&N and gave it a full on service and it found its ***** once again
But there was something holding it back………………………
ahh yes the exhaust plain standard nothing special so a friend sold me his Blue flame
it arrived like this
Went on the car like this
So old exhaust off
New exhaust Ready NO expense spared even on the bubble wrap lol
#4
Driver School Candidate
Thread Starter
Join Date: Apr 2009
Location: UK
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
I then had an accident when parking and kerbed the passenger Rear wheel not happy, then had a brain wave my mates BMW had reverse dip mirrors I wonder if I can get that on mine of course Lexus were no help so off I went and found my own way
So here we have a box of tricks Universal as long as they have the up down function lol
Fitting was not easy
Now as you read above I fitted a rear camera so why not a front one I thought so I did
By this time I was starting to run out of little things to do, so had a long hard think and realised a bigger intercooler was needed
This big
As you can see the standard TTE one is the baby thing underneath
Whilst the bumper was off I fitted some LED's to the grill to light the intercooler at some of our car meets (only at meets)
Whilst in the process I changed my side lights to LED sidelight strips
I also Fitted 6400k HID I did wire these in non standard they basicly take a trigger from the normal light circuit to activate a relay which draws power direct from the battery this = no dips when cranking.
You can buy these relay kits buy my thoughts why buy when you can make!!
So here we have a box of tricks Universal as long as they have the up down function lol
Fitting was not easy
Now as you read above I fitted a rear camera so why not a front one I thought so I did
By this time I was starting to run out of little things to do, so had a long hard think and realised a bigger intercooler was needed
This big
As you can see the standard TTE one is the baby thing underneath
Whilst the bumper was off I fitted some LED's to the grill to light the intercooler at some of our car meets (only at meets)
Whilst in the process I changed my side lights to LED sidelight strips
I also Fitted 6400k HID I did wire these in non standard they basicly take a trigger from the normal light circuit to activate a relay which draws power direct from the battery this = no dips when cranking.
You can buy these relay kits buy my thoughts why buy when you can make!!
#5
Driver School Candidate
Thread Starter
Join Date: Apr 2009
Location: UK
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
So now that I had the bigger cooler the bigger exhaust I then realised I had no way of telling what it was doing pressure wise etc, now most people have gauges on the A pillar in the Is200 or then have them mounted in the centre console. Now me being me wanted to be different I wanted the best of both worlds gauges in the middle but stealthy, so I hunted until I came across the HKS Camp 2 System very cool
It arrived like this
Doesn’t look like much but a pain to wire in but how wrong was I…
So all working and here is the kiddy
I was happy until I tried driving and looking at the gauges then realised they were to low down so time for a rethink
Now the is200 comes in a navigator model as well but the sat nav is out of the arc luckily I didn’t have it in mine I so I thought why I don’t put a touch screen in the standard housing so I got to work
Part a
Part b
Take them all apart have a juggle with the wiring and you get
So on to Fitting in the car
Here we have it working
Did I mention it was toucscreen so I also have an INCAR pc well my laptop in the glove box at meets lol!!!
It arrived like this
Doesn’t look like much but a pain to wire in but how wrong was I…
So all working and here is the kiddy
I was happy until I tried driving and looking at the gauges then realised they were to low down so time for a rethink
Now the is200 comes in a navigator model as well but the sat nav is out of the arc luckily I didn’t have it in mine I so I thought why I don’t put a touch screen in the standard housing so I got to work
Part a
Part b
Take them all apart have a juggle with the wiring and you get
So on to Fitting in the car
Here we have it working
Did I mention it was toucscreen so I also have an INCAR pc well my laptop in the glove box at meets lol!!!
#6
Driver School Candidate
Thread Starter
Join Date: Apr 2009
Location: UK
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Since then I have also fitted TTE Coilovers and TTE ARBS but no pics of these im afraid as the weather was a bit dodgy once fitted I took the car to Wheels In Motion and Dr Bones did a full Geo set up car handles perfectly now and no inner tire wear yippee
whilst it was there I also got the arches rolled so I can now fit a Nice set of 18's on or 19s if I really wanted but then it might sit a tad to low in the wheel arch will have to see....
So this now sees up until about December 09 I now started to feel the car was lacking some bling!!
So I invested in the following
Stainless Steel Radiator Panel
Stainless Steel Suspension Tops
TTE Supercharger Badges
Chrome Lexus Steering wheel Badge is shown above
Now I have done some cosmetic things back to the fun stuff
LED Dash Lights.
Now lets take something from a late spec car and make it work in mine…
PUSH START BABY…
Take one standard centre section
Beat it with a dremel
Test Fit switch
Now make the circuit to control the car
Circuit mk 1
Circuit Mk2
So now we have the Switch In the console and we have the circuit so time to join the 2
I don’t really agree with taping cables if it’s a install so I use heatshrink and braid
Here is the finished article
Security system active
As you see the car wont start
whilst it was there I also got the arches rolled so I can now fit a Nice set of 18's on or 19s if I really wanted but then it might sit a tad to low in the wheel arch will have to see....
So this now sees up until about December 09 I now started to feel the car was lacking some bling!!
So I invested in the following
Stainless Steel Radiator Panel
Stainless Steel Suspension Tops
TTE Supercharger Badges
Chrome Lexus Steering wheel Badge is shown above
Now I have done some cosmetic things back to the fun stuff
LED Dash Lights.
Now lets take something from a late spec car and make it work in mine…
PUSH START BABY…
Take one standard centre section
Beat it with a dremel
Test Fit switch
Now make the circuit to control the car
Circuit mk 1
Circuit Mk2
So now we have the Switch In the console and we have the circuit so time to join the 2
I don’t really agree with taping cables if it’s a install so I use heatshrink and braid
Here is the finished article
Security system active
As you see the car wont start
#7
Driver School Candidate
Thread Starter
Join Date: Apr 2009
Location: UK
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
As you read above I had temporary car PC using my sony Vaio so now is time for a proper job
One pc
One GRS Receiver
One Cd Player
One OBD2 Reader
One Ipod
One AV Input
The pc uses a program Called Centrafuse here is the front end
You will have also read a bit further back in this thread about my arches being rolled well that was in preparation for the new wheels so we went from these
To These
Also spent the weekend washing and detailing mine and a mates car
So here we have it there are a few other mods on the car which I don’t have pictures of but you can all see at meets
Scarlatti Red Is200 sport
Styling kit
Colour Coded Sport Grill
TTE Supercharger
TTE Anti Roll Bars
TTE Coil over’s 45mm
blue Silicone Hoses
Red Cable Tubing
Blue Flame Exhaust
Larger Intercooler
K&N Panel Filter
Painted Callipers
Stainless Steel Radiator Panel
Stainless Steel Suspension Tops
6000k HID Dipped Beam
LED Eye brow Side lights
PACE car strobes
Intercooler Lights
Blue foot well Lights
Blue Ignition Ring
Reverse Camera
Reverse Dip mirror
Front mounted camera
DDX-6029 DVD Head-unit
IPod Interface
Bluetooth Interface
HKS Camp 2
Boost sensor
OIL Temp Sensor
Alpine 4ch Video Switcher
7" touch screen in Nav Housing
Car Pc Input
Auto Window roll up on arming
One Touch on all Windows
Fog to Brake Conversion
Uprated Earthing kit
Voltage Stabilizer
Relocated Front Horns
Stainless Steel Aircon Rings
Smoked Rear Lights
Arches Rolled
Clifford Avant Guard 5.5
Clifford Call Guard
In Car Pc/sat Nav
Push Start Ignition
Blue Instrument Cluster
remote start
Stainless Steel Lexus badge
Stainless steel Kanji badge
Iridium Spark Plugs
Leather Arm rest
Updates will follow soon
Thanks for reading
Rabster
One pc
One GRS Receiver
One Cd Player
One OBD2 Reader
One Ipod
One AV Input
The pc uses a program Called Centrafuse here is the front end
You will have also read a bit further back in this thread about my arches being rolled well that was in preparation for the new wheels so we went from these
To These
Also spent the weekend washing and detailing mine and a mates car
So here we have it there are a few other mods on the car which I don’t have pictures of but you can all see at meets
Scarlatti Red Is200 sport
Styling kit
Colour Coded Sport Grill
TTE Supercharger
TTE Anti Roll Bars
TTE Coil over’s 45mm
blue Silicone Hoses
Red Cable Tubing
Blue Flame Exhaust
Larger Intercooler
K&N Panel Filter
Painted Callipers
Stainless Steel Radiator Panel
Stainless Steel Suspension Tops
6000k HID Dipped Beam
LED Eye brow Side lights
PACE car strobes
Intercooler Lights
Blue foot well Lights
Blue Ignition Ring
Reverse Camera
Reverse Dip mirror
Front mounted camera
DDX-6029 DVD Head-unit
IPod Interface
Bluetooth Interface
HKS Camp 2
Boost sensor
OIL Temp Sensor
Alpine 4ch Video Switcher
7" touch screen in Nav Housing
Car Pc Input
Auto Window roll up on arming
One Touch on all Windows
Fog to Brake Conversion
Uprated Earthing kit
Voltage Stabilizer
Relocated Front Horns
Stainless Steel Aircon Rings
Smoked Rear Lights
Arches Rolled
Clifford Avant Guard 5.5
Clifford Call Guard
In Car Pc/sat Nav
Push Start Ignition
Blue Instrument Cluster
remote start
Stainless Steel Lexus badge
Stainless steel Kanji badge
Iridium Spark Plugs
Leather Arm rest
Updates will follow soon
Thanks for reading
Rabster
Trending Topics
#8
i want to be the first to say nice, well done, clean is200. how does your push start work? is it the same type that comes in the s2000 (put the key in, turn the car on then "push start")
#10
Driver School Candidate
Thread Starter
Join Date: Apr 2009
Location: UK
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
disarm car you have 30 seconds to start the car
get in 1st push turns acc on
2nd push turns IGN on
3rd push and hold cranks the car
no need for the key at all (i however do need it to disable the steering lock for now)
i am working on a 3rd design for the circuit which will incorporate more features from the latest spec cars foot on brakes to start and stop etc
#12
Wow you have some crazy good wiring skills i wish i could have half those on my IS. Your welcome to come to the states and do my car lol. I dont know anything about the is200 or that odd looking motor lol how much power did you make before? How much did you get by adding the s/c?
#13
Driver School Candidate
Thread Starter
Join Date: Apr 2009
Location: UK
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Wow you have some crazy good wiring skills i wish i could have half those on my IS. Your welcome to come to the states and do my car lol. I dont know anything about the is200 or that odd looking motor lol how much power did you make before? How much did you get by adding the s/c?
Cheers for all the comments people
The car as standard sits at about 160bhp
the charger gives you a increase to 204bhp
#15
Lexus Champion
iTrader: (1)
Join Date: Oct 2005
Location: philly
Posts: 1,925
Likes: 0
Received 0 Likes
on
0 Posts
Thanks afraid its not like the S2000 one at all this runs in conjuction with my aftermarket alarm
disarm car you have 30 seconds to start the car
get in 1st push turns acc on
2nd push turns IGN on
3rd push and hold cranks the car
no need for the key at all (i however do need it to disable the steering lock for now)
i am working on a 3rd design for the circuit which will incorporate more features from the latest spec cars foot on brakes to start and stop etc
disarm car you have 30 seconds to start the car
get in 1st push turns acc on
2nd push turns IGN on
3rd push and hold cranks the car
no need for the key at all (i however do need it to disable the steering lock for now)
i am working on a 3rd design for the circuit which will incorporate more features from the latest spec cars foot on brakes to start and stop etc
All you need now is a remote car starter.
That should help you start with steering wheel lock engaged, and should help with shutting the car off when tapping foot brake.