Wheel Fitment
#1
Driver School Candidate
Thread Starter
Join Date: Apr 2010
Location: GA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Wheel Fitment
I've done what seems an endless amount of research, math, and number crunching... But I'd really like to get some help from people that have actually done it.
I'm lowered on Tein S-Tech springs for starters...
How will this fitment work out?
Front:
18x8 +30 215/40/18
Rear:
18x9.5 +15 225/40/18
Can this be done, and if so, what all would need to be done to obtain this? Would there need to be a tremendous amount of fender pulling on the rear... So much that it would be mangled?
Also, given the nature of the springs (not nearly has stiff as a coilover setup), could this cause problems with clearance on turning/spring compression?
Thanks much!
-Tyler
I'm lowered on Tein S-Tech springs for starters...
How will this fitment work out?
Front:
18x8 +30 215/40/18
Rear:
18x9.5 +15 225/40/18
Can this be done, and if so, what all would need to be done to obtain this? Would there need to be a tremendous amount of fender pulling on the rear... So much that it would be mangled?
Also, given the nature of the springs (not nearly has stiff as a coilover setup), could this cause problems with clearance on turning/spring compression?
Thanks much!
-Tyler
Thread
Thread Starter
Forum
Replies
Last Post