Any pics of Slammed IS300 with Stock Wheels?
#1
Lexus Champion
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: philly
Posts: 1,925
Likes: 0
Received 0 Likes
on
0 Posts
Any pics of Slammed IS300 with Stock Wheels?
What spacers do people use if you are slammed with stock wheels? I don't know what kind of spacers I will need with my stock wheels on. And what does IS look like slammed with stock wheels? I tried to do a search but didn't see anything....
#4
hope this helps. this is just pictures with my phone. i haven't put any spacers on yet but was planning to put some on the rear. if u haven't don't any fender mods you should only need 15 mm if you tucking rims n tires, 20 mm if your just want it flush.
*** ps the car looks lowered more in the back but that is only because it is so tucked in and has -3 camber. i am also on a lil bigger tire too
Last edited by VIPJOSH; 04-28-10 at 08:45 AM.
#5
Driver School Candidate
Join Date: Apr 2010
Location: GA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Don't know if this constitutes as "slammed", but it's good for me. I am running Ichiba 15mm spacers up front and 20mm spacers in the rear with Tein S-Tech springs. Could probably even get by with a 25mm in the rear with some rolling.
#6
Driver School Candidate
Join Date: Jan 2008
Location: MI
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Is this slammed enough? I'll probably crank the coilovers down a tad bit more to get closer to VIPJosh's height. No spacers.
Last edited by Shake1; 04-26-10 at 05:53 PM.
Trending Topics
#8
hope this helps. this is just pictures with my phone. i haven't put any spacers on yet but was planning to put some on the rear. if u haven't don't any fender mods you should only need 15 mm if you tucking rims n tires, 20 mm if your just want it flush.
*** ps the car looks lowered more in the back but that is only because it is so tucked in. i am also on a lil bigger tire too
#14
Lexus Champion
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: philly
Posts: 1,925
Likes: 0
Received 0 Likes
on
0 Posts
My car is about the same height.
Maybe a little higher, but I can lower it another inch and a half if I want (tein coilovers for the win!!)
But I am already scraping on a lot of stuff and I don't want my ride to be too stiff/bouncy.
Also I am afraid of how low it will be when I have my sideskirts put on - on tuesday.
I'm new to the whole spacers thing.... Will my factory lugs snap if I put 20mm spacers on rear and 15mm on front?