Installs (with Pics) - Page 3

rominl · 10-25-04, 02:22 AM

i am making this thread a sticky for now until we figure out a better way to group all the info

Beachtyme has done a very good job on taking al the pics for al lthe diy, this is awesome! big applause for him!

Beachtyme · 11-04-04, 09:22 PM

I wanna add that any C Florida bro's that wanna hook it up, shoot me a PM.

AA Concepts · 11-10-04, 06:29 AM

Where is the SAFC install?

Beachtyme · 11-10-04, 06:32 AM

Quote:

Originally posted by LCA575
Where is the SAFC install?

I got pics of the ECU connections, but they didn't turn out very good. Unfortunately, I didn't have the macro set correctly for my digicam when I took the closeup shots of the ECU connections.

The rest of the install was just running the wires down the lint tray and through the upper console.

Wad up with the Gen 6 DDE's, J?

AA Concepts · 11-10-04, 09:03 AM

If you can email me the pics of the connections that would be great AdvanAutoCo@aol.com

I installed mine and there is something wrong, I checked the wiring multiple times and can't seem to find the problem. I have installed AFCs and Piggybacks before on other cars so I don't know if its a mistake on my part or there is just something I am overlooking. After you installed yours and did the initial setup it started and ran normally?

Here the setup I used:
Firewire
4 in 4 out
1 in 1 out
6 (arrow up and right)

I didn't fool with any other settings but the car starts, idles roughly, bogs down when the throttle is depressed, then will just die.

Let me know if you have any advise!

Anyways, the Gen-6 V.2 IS300 Demon Eyes are in stock, I had alot of people waiting on them (and tons of installs to do) sorry I didn't get back to you about it sooner.

Perhaps you can do an Install with pics

Beachtyme · 11-10-04, 09:32 AM

J,

I saw your post at .NET (http://www.is300.net/forums/showthre...highlight=safc) and you seem to have the basic settings correct.

I will check mine and let you know. I used the wiring diagram and instructions that webmaster posted on there and everything is fine.

Right now, my SAFC is detuned and is really only functioning as a monitor. I got a CEL right after having it tuned and undid everything to get rid of the CEL, which it did.

Also, I will shoot you a PM or give you a call on the DDE's, I am ready to do the mod.

Taks_is300 · 01-30-05, 10:35 PM

i was just curiousi noticed that the new header had places for the 02 sensor but no cat/precat i was wondering did your check engine light ever come on????

Beachtyme · 02-08-05, 11:08 AM

Quote:

Originally Posted by Taks_is300

i was just curiousi noticed that the new header had places for the 02 sensor but no cat/precat i was wondering did your check engine light ever come on????

www.o2simulator.com

^^^ That's the work around for the CEL from the header install.

lucino · 02-20-05, 04:00 PM

Good job man.

I would never try to install the headers myself, how did you reach some of the bolts?
much props from me.

Beachtyme · 03-12-05, 07:51 AM

Quote:

Originally Posted by lucino

Good job man.

I would never try to install the headers myself, how did you reach some of the bolts?
much props from me.

The hardest part is getting the stock manifold outta the engine bay, the rest is relatively easy.

As for the bolts, you just need a couple of different socket extensions.